# Sv04 firmware alternatives

**URL:** <https://forum.sovol3d.com/t/sv04-firmware-alternatives/5109>\
**Category:** Sovol SV04 IDEX\
**Created:** [June 5, 2024, 7:37am UTC](https://forum.sovol3d.com/t/sv04-firmware-alternatives/5109 "2024-06-05T07:37:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![axxirT](https://avatars.discourse-cdn.com/v4/letter/a/ba9def/32.png) [@axxirT](https://forum.sovol3d.com/u/axxirT)\
**Post date:** [June 5, 2024, 7:37am UTC](https://forum.sovol3d.com/t/sv04-firmware-alternatives/5109/1 "2024-06-05T07:37:25Z")

</div>

So now i have tested  
Klipper (bully)  
And i got always an error when heating E1 and E2  
But i do not like how klipper and the screen work together

I changed to boerns marlin fork  
Works well…

Next i have checked johncarlsons marlin fork  
Works also for me.

But johncsrlson has inputshaping so i keep this .

I had an issue with filament run out but it looks like the sensors are switched may be this is firmware or an mistake from sovol.

Which k factor is best for sv04 ?  
I have 0.05 now with good results.  
…
