# SV04 does not boot anymore **URL:** \ **Category:** Sovol SV04 IDEX\ **Created:** [March 9, 2023, 8:01pm UTC](https://forum.sovol3d.com/t/sv04-does-not-boot-anymore/1921 "2023-03-09T20:01:07Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Skipper0815](https://avatars.discourse-cdn.com/v4/letter/s/7ab992/32.png) [@Skipper0815](https://forum.sovol3d.com/u/Skipper0815)\ **Post date:** [March 9, 2023, 8:01pm UTC](https://forum.sovol3d.com/t/sv04-does-not-boot-anymore/1921/1 "2023-03-09T20:01:07Z")
5 weeks old printer does not boot anymore after power on. Does show starting screen without any further progress on system booting . Fans are on, BL touch moves twice but afterwards no more actions (waited 10 min) . Tried to switch on/off several times without any change of issue. Tried to reflash firmware but firmware.bin file stays unchanged (no change to firmware.cur) so it not even reads the SD card. Nay suggestions or do I have to return the printer under warranty to Sovol ? Thanks Regards Herbert ![Boot error SV04](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/bc4cbd7a7972c069d345ce518fce1a8fb5339699.jpeg) ---
**Author:** ![scrolli](https://avatars.discourse-cdn.com/v4/letter/s/c57346/32.png) [@scrolli](https://forum.sovol3d.com/u/scrolli)\ **Post date:** [August 31, 2023, 11:34am UTC](https://forum.sovol3d.com/t/sv04-does-not-boot-anymore/1921/2 "2023-08-31T11:34:54Z")
> [@Skipper0815](#): > > sh firmware but firmware.bin file stays unchanged (no change to firmware.cur) so it not even reads t I have the same problem. Is there any solution? ---
**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\ **Post date:** [August 31, 2023, 1:17pm UTC](https://forum.sovol3d.com/t/sv04-does-not-boot-anymore/1921/3 "2023-08-31T13:17:11Z")
Try an other SD-card formatted properly ([FAT32, 4096 Bytes, max. 8 GByte](https://forum.sovol3d.com/t/sv06-mainboard-brick-after-updating-sovol-firmware/862/68)).