# SV03 Touch Screen

**URL:** <https://forum.sovol3d.com/t/sv03-touch-screen/110>\
**Category:** Sovol SV03 BIG DD 3D printer\
**Created:** [September 23, 2021, 11:08pm UTC](https://forum.sovol3d.com/t/sv03-touch-screen/110 "2021-09-23T23:08:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![concretetweak](https://avatars.discourse-cdn.com/v4/letter/c/6de8d8/32.png) [@concretetweak](https://forum.sovol3d.com/u/concretetweak)\
**Post date:** [September 23, 2021, 11:08pm UTC](https://forum.sovol3d.com/t/sv03-touch-screen/110/1 "2021-09-23T23:08:48Z")

</div>

Just received my touch screen I followed the instructions in the .rar file off the website to flash the touch screen. I remove the sd card from the screen power the printer back on and I’m stuck at the on screen. Progress bar doesn’t move. I tried reflashing and got the same issue.

Any help is appreciated.

---

<div class="post-metadata">

**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\
**Post date:** [April 14, 2022, 9:54am UTC](https://forum.sovol3d.com/t/sv03-touch-screen/110/2 "2022-04-14T09:54:21Z")

</div>

Hi Concretetweak  
You can refresh the motherboard firmware to try, most of the customers who encountered this problem in the re-flash a motherboard firmware can be solved  
If your screen is Chinese, click a few more screen will become English