# SV03 Leveling Issue

**URL:** <https://forum.sovol3d.com/t/sv03-leveling-issue/241>\
**Category:** Sovol SV03 BIG DD 3D printer\
**Created:** [May 2, 2022, 8:14pm UTC](https://forum.sovol3d.com/t/sv03-leveling-issue/241 "2022-05-02T20:14:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JJAllen](https://avatars.discourse-cdn.com/v4/letter/j/f07891/32.png) [@JJAllen](https://forum.sovol3d.com/u/JJAllen)\
**Post date:** [May 2, 2022, 8:14pm UTC](https://forum.sovol3d.com/t/sv03-leveling-issue/241/1 "2022-05-02T20:14:24Z")

</div>

Have a SV03 with the touch screen installed. I just put in the silicon replacements for the leveling springs.

Is there a way to move the extruded down? The gap is so large that the leveling screws are too loose - and there’s still a gap. Yes, I have the short silicon block in the back right (by the heating cord).

The machine is only two months old. No leveling issues with the springs installed.

---

<div class="post-metadata">

**Author:** ![paul\_nicholls](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/paul_nicholls/32/54_2.png) [@paul\_nicholls](https://forum.sovol3d.com/u/paul_nicholls)\
**Post date:** [May 9, 2022, 5:36am UTC](https://forum.sovol3d.com/t/sv03-leveling-issue/241/2 "2022-05-09T05:36:30Z")

</div>

Hi, have you seen this video? Not sure if it will help you.

[![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/2bfd0bd6c7ef838b80fa9a97705c53a2688090a9.jpeg "Calibrating Z-Offset With A BLTouch Bed Levelling Probe") ](https://www.youtube.com/watch?v=y_1Kg45APko)