# Suggestion for filament changer? (AMS) **URL:** \ **Category:** Sovol Zero\ **Created:** [February 21, 2026, 8:24am UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647 "2026-02-21T08:24:40Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![sebastianha](https://avatars.discourse-cdn.com/v4/letter/s/c68b51/32.png) [@sebastianha](https://forum.sovol3d.com/u/sebastianha)\ **Post date:** [February 21, 2026, 8:24am UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647/1 "2026-02-21T08:24:40Z")
Hi, I catch myself sometimes that I want to print something but I am too lazy to change the filament, because it’s a manual process. Does someone have a suggestion for an AMS for the Zero? I do not need mid-print filament swapping, just for changing the filament before printing. ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [February 21, 2026, 9:09pm UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647/2 "2026-02-21T21:09:49Z")
Are you looking for a turnkey solution or a DIY build? How many rolls do you want “online”? ---
**Author:** ![blDKBVFlbv](https://avatars.discourse-cdn.com/v4/letter/b/58956e/32.png) [@blDKBVFlbv](https://forum.sovol3d.com/u/blDKBVFlbv)\ **Post date:** [February 22, 2026, 8:58am UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647/3 "2026-02-22T08:58:50Z")
Haven’t got around to it, but i’ll probs be doing this : [SV08 Max / SV Zero Multicolor Toolhead Upgrade by CN3D by Nadir @ CN3D | Download free STL model | Printables.com](https://www.printables.com/model/1515435-sv08-max-sv-zero-multicolor-toolhead-upgrade-by-cn) so that i can cut the filament (never got tip forming). Unfornatly the owner hasn’t yet repilied as ti how easy it is to fit to a zero. I also have loads of steppers around and a free pico so probs will do the 3MS Happy Hare route. ---
**Author:** ![sebastianha](https://avatars.discourse-cdn.com/v4/letter/s/c68b51/32.png) [@sebastianha](https://forum.sovol3d.com/u/sebastianha)\ **Post date:** [February 22, 2026, 10:02am UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647/4 "2026-02-22T10:02:19Z")
I am open for both. 2 at least (obvious) but also would like 4. I currently have the Sovol SH02 dryer, would be nice if it’s compatible. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [February 22, 2026, 11:33am UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647/5 "2026-02-22T11:33:43Z")
> [@blDKBVFlbv](#): > > Unfornatly the owner hasn’t yet repilied as ti how easy it is to fit to a zero The Zero & SV08 Max use the same toolhead…the normal SV08 does not. ---
**Author:** ![Fluffea](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/fluffea/32/4208_2.png) [@Fluffea](https://forum.sovol3d.com/u/Fluffea)\ **Post date:** [April 25, 2026, 4:39am UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647/6 "2026-04-25T04:39:32Z")
You ever get to doing this? I have the toolhead basically all built but I have several issues/questions regarding it if you did. ---
**Author:** ![blDKBVFlbv](https://avatars.discourse-cdn.com/v4/letter/b/58956e/32.png) [@blDKBVFlbv](https://forum.sovol3d.com/u/blDKBVFlbv)\ **Post date:** [April 25, 2026, 5:19am UTC](https://forum.sovol3d.com/t/suggestion-for-filament-changer-ams/9647/7 "2026-04-25T05:19:35Z")
Hello, unfornatly not. But came across this beast : [GitHub - Vercanti/Hack-Xol: Small form factor toolhead originally designed to fit the Sovol Zero · GitHub](https://github.com/Vercanti/Hack-Xol) Might wait for the new nebula extruder that has a cutter.