# Start and end gcode? **URL:** \ **Category:** Sovol SV06 Plus\ **Created:** [April 8, 2023, 9:09am UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183 "2023-04-08T09:09:38Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![3dprinter](https://avatars.discourse-cdn.com/v4/letter/3/7993a0/32.png) [@3dprinter](https://forum.sovol3d.com/u/3dprinter)\ **Post date:** [April 8, 2023, 9:09am UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/1 "2023-04-08T09:09:38Z")
Does someone maybe know the start and end gcode of the sv06+? Is it the same as the one for the sv06? Not sure if it matters, but it is for prusaslicer. Thanks in advance! ---
**Author:** ![ashok](https://avatars.discourse-cdn.com/v4/letter/a/ed655f/32.png) [@ashok](https://forum.sovol3d.com/u/ashok)\ **Post date:** [April 9, 2023, 6:56am UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/2 "2023-04-09T06:56:44Z")
[Sovol SV06 Plus | Cura Settings & Profile - Guide & List (the3dprinterbee.com)](https://the3dprinterbee.com/sovol-sv06-plus-cura-settings/#Layer_Height) ---
**Author:** ![ulao](https://avatars.discourse-cdn.com/v4/letter/u/278dde/32.png) [@ulao](https://forum.sovol3d.com/u/ulao)\ **Post date:** [April 13, 2023, 3:50pm UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/3 "2023-04-13T15:50:53Z")
just to point something out, this link is what I used for cura also. but the cura that comes with the printer ( on the SD card) does not use the same codes. I’m just saying… they are not the same. Be nice to know what is right. ---
**Author:** ![HonSolo](https://avatars.discourse-cdn.com/v4/letter/h/ecc23a/32.png) [@HonSolo](https://forum.sovol3d.com/u/HonSolo)\ **Post date:** [May 18, 2023, 10:03pm UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/4 "2023-05-18T22:03:36Z")
I copied over to prusaslicer what is in sovolslicer, however, it did not meet my expectation. So I modified it. here you go, let me know if this works for you **Start Gcode:** M104 S170 ; set nozzle to 170 M190 S[first\_layer\_bed\_temperature] ; set bed to printing temp and wait G28 ;Home M420 S1 ; initialize bed leveling G29 ; bed leveling M109 S[first\_layer\_temperature] ; set nozzle temp to print temp and wait G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up G1 X1.1 Y20 Z0.28 F5000.0 ;Move to start position G1 X1.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X1.4 Y200.0 Z0.28 F5000.0 ;Move to side a little G1 X1.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up **End Gcode:** G91 ;Relative positioning G1 E-2 F2700 ;Retract a bit G1 E-2 Z0.2 F2400 ;Retract and raise Z G1 X0 Y220 F3000 ;Wipe out G1 Z10 ;Raise Z more G90 ;Absolute positionning G1 X0 Y300 ;Present print M106 S0 ;Turn-off fan M104 S0 ;Turn-off hotend M140 S0 ;Turn-off bed M84 X Y E ;Disable all steppers but Z ---
**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\ **Post date:** [May 26, 2023, 2:12am UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/5 "2023-05-26T02:12:47Z")
I don’t think we are in kansas anymore, Toto. ---
**Author:** ![spannmagoo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/spannmagoo/32/1006_2.png) [@spannmagoo](https://forum.sovol3d.com/u/spannmagoo)\ **Post date:** [May 27, 2023, 4:38pm UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/6 "2023-05-27T16:38:13Z")
My Start Code and my Profiles. ```auto G92 E0 ; Reset Extruder M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature M104 S160; start warming extruder to 160 G28 ; Home all axes M420 S1; G92 E0 ;Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed M104 S{material_print_temperature_layer_0} ; Set Extruder temperature G1 X10.1 Y20 Z0.28 F5000.0 ; Move to start position M109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature M300 P250 ; play chime to indicate print starting G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ; Draw the first line G1 X10.4 Y200.0 Z0.28 F5000.0 ; Move to side a little G1 X10.4 Y20 Z0.28 F1500.0 E30 ; Draw the second line G92 E0 ; Reset Extruder G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed G1 X15.1 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish ``` Try these resource files for the Cura 5.3.1 profiles. [Resources2.zip](https://forum.sovol3d.com/uploads/short-url/d1nStKixYF1fQh3Klb7VaNSSrnw.zip) (458.2 KB) ---
**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\ **Post date:** [June 3, 2023, 9:36pm UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/7 "2023-06-03T21:36:15Z")
after all the machinery and physics and hierarchical and babelfish translations and hundreds of topic specific youtubes and age… It still gut checks me when you finish rechecking, sit back and say Yup, the factory went out of their way to publish incorrect data in one place, and embrace 3rd party data in another ---
**Author:** ![meicalnissyen](https://avatars.discourse-cdn.com/v4/letter/m/ac91a4/32.png) [@meicalnissyen](https://forum.sovol3d.com/u/meicalnissyen)\ **Post date:** [June 3, 2023, 11:45pm UTC](https://forum.sovol3d.com/t/start-and-end-gcode/2183/8 "2023-06-03T23:45:23Z")
How does this address the OP question?