# Sovol3D Cura\_1.7.2\_x64.exe

**URL:** <https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080>\
**Category:** Sovol SV06 Plus\
**Created:** [December 15, 2023, 4:59pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080 "2023-12-15T16:59:20Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![elomeister](https://avatars.discourse-cdn.com/v4/letter/e/e79b87/32.png) [@elomeister](https://forum.sovol3d.com/u/elomeister)\
**Post date:** [December 15, 2023, 4:59pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080/1 "2023-12-15T16:59:21Z")

</div>

I got the Klipper screen for my SV06 plus and wanted to install the new Cura software which was delivered on the memory stick. The installer stops after about a third of the decompressing and tells me that maybe the installer is corrupted.  
Can anybody tell me where to download a fresh Exe?  
I tried the installation first in German, and then again in English. Both installatiin produce the same error.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [December 15, 2023, 10:11pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080/2 "2023-12-15T22:11:28Z")

</div>

> [@elomeister](#):
>
> got the Klipper screen for my SV06 plus and wanted to install the new Cura software which was delivered on the memory stick. The installer stops after about a third of the decompressing and tells me that maybe the installer is corrupted.  
> Can anybody tell me where to download a fresh Exe?  
> I tried the installation first in German, and then again in English. Both installatiin produce the same error.

Hi,  
Have you tried to install the official release from Ultimaker ?  
Normally it works.

---

<div class="post-metadata">

**Author:** ![elomeister](https://avatars.discourse-cdn.com/v4/letter/e/e79b87/32.png) [@elomeister](https://forum.sovol3d.com/u/elomeister)\
**Post date:** [December 16, 2023, 9:30am UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080/3 "2023-12-16T09:30:59Z")

</div>

The Ultimaker releases have completely different version numbers.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [December 16, 2023, 9:32am UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080/4 "2023-12-16T09:32:06Z")

</div>

Hi,  
It doesn’t matter.

---

<div class="post-metadata">

**Author:** ![elomeister](https://avatars.discourse-cdn.com/v4/letter/e/e79b87/32.png) [@elomeister](https://forum.sovol3d.com/u/elomeister)\
**Post date:** [December 16, 2023, 9:34am UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080/5 "2023-12-16T09:34:06Z")

</div>

I will try it today, see what happens.

---

<div class="post-metadata">

**Author:** ![bobfound](https://avatars.discourse-cdn.com/v4/letter/b/54ee81/32.png) [@bobfound](https://forum.sovol3d.com/u/bobfound)\
**Post date:** [May 9, 2024, 4:07pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080/6 "2024-05-09T16:07:58Z")

</div>

I have the same problem. did you find a solution? Can’t find the download online.

---

<div class="post-metadata">

**Author:** ![Telstar](https://avatars.discourse-cdn.com/v4/letter/t/f475e1/32.png) [@Telstar](https://forum.sovol3d.com/u/Telstar)\
**Post date:** [May 20, 2024, 12:19am UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-7-2-x64-exe/4080/7 "2024-05-20T00:19:54Z")

</div>

Try this:

> **[Firmware Download](https://www.sovol3d.com/pages/download)**
>
> SOVOL SV01 SV02 SV03 SV04 SV05 SV01PRO SV06 SV06PLUS SV07 SV07PLUS COMGROW LASER Z1 Z1PRO T500 T300 FIRMWARE SLICER CURA SETTING.

The USB that came with my Klipper was corrupted as well. Not doing good Sovol, not doing good…