# Sovol3D\_Cura-1.5.0-win64

**URL:** <https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** slicer\
**Created:** [January 3, 2023, 7:50pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208 "2023-01-03T19:50:29Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![karlsinn](https://avatars.discourse-cdn.com/v4/letter/k/6de8d8/32.png) [@karlsinn](https://forum.sovol3d.com/u/karlsinn)\
**Post date:** [January 3, 2023, 7:50pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208/1 "2023-01-03T19:50:29Z")

</div>

Hi,  
just received the SV06 today, I’m done building it and trying to install the software now.  
In the user manual the Cura version mentioned is 1.5.0 but I can’t find it on the SD that was delivered with the printer and if I go to the website I can find there “only” version 1.3.0 for download.

Where can I find the 1.5.0?

Also, but this might be off topic, is there a way to run all this on linux computers?

thx,  
Karl

---

<div class="post-metadata">

**Author:** ![Jean](https://avatars.discourse-cdn.com/v4/letter/j/fbc32d/32.png) [@Jean](https://forum.sovol3d.com/u/Jean)\
**Post date:** [January 4, 2023, 5:51am UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208/2 "2023-01-04T05:51:19Z")

</div>

> **[Sovol3D\_Cura-1.5.3-win64.exe](https://drive.google.com/file/d/1yWWxQliLvgzybmW_ZQxYQYgClgCFGTNh/view)**
>
> Google Drive file.

---

<div class="post-metadata">

**Author:** ![easyuse94146](https://avatars.discourse-cdn.com/v4/letter/e/278dde/32.png) [@easyuse94146](https://forum.sovol3d.com/u/easyuse94146)\
**Post date:** [April 3, 2023, 8:03am UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208/3 "2023-04-03T08:03:24Z")

</div>

Hello, I just received a new SOVOL SV05 printer. I would like to start working with it with the most recent release of software. Unfortunately, the link provided does not show any file any longer but an error message tells that the file was moved to the trash folder. Would you please be so kind as to post another link to the most recent software file so that I can download it and start working with my new Sovol SV05 on best practise base? Many thanks in advance  
Susanne

---

<div class="post-metadata">

**Author:** ![Krosh](https://avatars.discourse-cdn.com/v4/letter/k/90db22/32.png) [@Krosh](https://forum.sovol3d.com/u/Krosh)\
**Post date:** [December 10, 2023, 7:01pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208/4 "2023-12-10T19:01:08Z")

</div>

Hello! Could u renew ur link, please? I also would like to download Cura ver 1.5. Thank u for ur time!

---

<div class="post-metadata">

**Author:** ![karlsinn](https://avatars.discourse-cdn.com/v4/letter/k/6de8d8/32.png) [@karlsinn](https://forum.sovol3d.com/u/karlsinn)\
**Post date:** [December 10, 2023, 8:19pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208/5 "2023-12-10T20:19:12Z")

</div>

No need for a link. Just download the latest Version of Cura. Preconfigured settings for the Sovol printers are included now.

---

<div class="post-metadata">

**Author:** ![Krosh](https://avatars.discourse-cdn.com/v4/letter/k/90db22/32.png) [@Krosh](https://forum.sovol3d.com/u/Krosh)\
**Post date:** [December 11, 2023, 5:18pm UTC](https://forum.sovol3d.com/t/sovol3d-cura-1-5-0-win64/1208/6 "2023-12-11T17:18:03Z")

</div>

I got not Sovol printer but Apiliqa one. Also i got only gcode file. So I’d like to download ver 1.5.X and check settings