# Sovol sv1 Pro

**URL:** <https://forum.sovol3d.com/t/sovol-sv1-pro/915>\
**Category:** Sovol SV01 Pro\
**Created:** [November 30, 2022, 1:12am UTC](https://forum.sovol3d.com/t/sovol-sv1-pro/915 "2022-11-30T01:12:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Resanders](https://avatars.discourse-cdn.com/v4/letter/r/e79b87/32.png) [@Resanders](https://forum.sovol3d.com/u/Resanders)\
**Post date:** [November 30, 2022, 1:12am UTC](https://forum.sovol3d.com/t/sovol-sv1-pro/915/1 "2022-11-30T01:12:49Z")

</div>

I seem to be having a problem to turn on my printer. It goes to the boot screen and then it freezes. Is there anyway I can fix this? Does anyone have advice?

---

<div class="post-metadata">

**Author:** ![Atroz](https://avatars.discourse-cdn.com/v4/letter/a/958977/32.png) [@Atroz](https://forum.sovol3d.com/u/Atroz)\
**Post date:** [November 30, 2022, 4:29pm UTC](https://forum.sovol3d.com/t/sovol-sv1-pro/915/2 "2022-11-30T16:29:48Z")

</div>

If you have a microSD card installed, pop it out and try again. That’s all that I can suggest.
