# SOVOL SV08 Fixed Gaps in first layer also some artifacts and layers not bonding, etc... Now FIXED

**URL:** <https://forum.sovol3d.com/t/sovol-sv08-fixed-gaps-in-first-layer-also-some-artifacts-and-layers-not-bonding-etc-now-fixed/5800>\
**Category:** Sovol SV08\
**Created:** [October 12, 2024, 8:29am UTC](https://forum.sovol3d.com/t/sovol-sv08-fixed-gaps-in-first-layer-also-some-artifacts-and-layers-not-bonding-etc-now-fixed/5800 "2024-10-12T08:29:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\
**Post date:** [October 12, 2024, 8:29am UTC](https://forum.sovol3d.com/t/sovol-sv08-fixed-gaps-in-first-layer-also-some-artifacts-and-layers-not-bonding-etc-now-fixed/5800/1 "2024-10-12T08:29:20Z")

</div>

**SOVOL SV08 Fixed Gaps in first layer also some artifacts and layers not bonding, etc… Now FIXED** by squeezing the extruder idler pin back into position:-

[![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/8/88099a937e4b1472c9e2cfaf35aea1aaccc4bd30.jpeg "SOVOL SV08 Fixed Gaps in first layer") ](https://www.youtube.com/watch?v=id2pMq37hFs)

Now fixed:-

[![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/8/83da5c0a6faa4ac269b0e42f38d4655f8310c54c.jpeg "SOVOL SV08 Gaps in first layer now fixed") ](https://www.youtube.com/watch?v=ET1a6J4ZG5w)