# SOVOL SV08 3D Printer Bed warping for PETG?

**URL:** <https://forum.sovol3d.com/t/sovol-sv08-3d-printer-bed-warping-for-petg/5578>\
**Category:** Sovol SV08\
**Tags:** leveling\
**Created:** [August 28, 2024, 3:34pm UTC](https://forum.sovol3d.com/t/sovol-sv08-3d-printer-bed-warping-for-petg/5578 "2024-08-28T15:34:46Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![SV08\_user](https://avatars.discourse-cdn.com/v4/letter/s/cdc98d/32.png) [@SV08\_user](https://forum.sovol3d.com/u/SV08_user)\
**Post date:** [September 5, 2024, 12:33pm UTC](https://forum.sovol3d.com/t/sovol-sv08-3d-printer-bed-warping-for-petg/5578/4 "2024-09-05T12:33:33Z")

</div>

This helps, Raise the Nozzle without Homing

> [@raise\_Z Distance 5mm, Homing not require cfg file](https://forum.sovol3d.com/t/raise-z-distance-5mm-homing-not-require-cfg-file/5617):
>
> I would like to have this added to the SOVOL SV08 display screen, I don’t know if this is possible using SOVOL firmware? ###################################################################### # raise\_Z.cfg # e.g. raise\_Z # raise\_Z Distance 5mm # Homing is not required; So some damage could be caused if not carefull allow space for the Z movement # The code does this to reduce the chance of accidentally commanding the head into the bed or a wall. # Once the printer is homed the software attempt…

---

_[View the full topic](https://forum.sovol3d.com/t/sovol-sv08-3d-printer-bed-warping-for-petg/5578)._