# SOVOL SV07 Plus, OrcaSlicer Networking **URL:** \ **Category:** Sovol SV07 Plus\ **Tags:** orcaslicer\ **Created:** [August 29, 2025, 7:28pm UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606 "2025-08-29T19:28:22Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![JamesCRocks](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jamescrocks/32/2195_2.png) [@JamesCRocks](https://forum.sovol3d.com/u/JamesCRocks)\ **Post date:** [August 29, 2025, 7:28pm UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606/1 "2025-08-29T19:28:22Z")
Hi, Can anyone direct me to wherever one goes to find out how to connect my OrcaSlicer installation (Windows 11 Pro, Orca v2.3.0) to my SOVOL SV07 Plus. I know the printer’s IP and can connect to it via browser. I can see Orca’s wireless button that brings up the “Physical Printer” dialog (host type: “MKS”)… if I enter the Hostname as the IP address, I get the error message “Could not connect to MKS: No connection could be made because the target machine actively refused it”, if I enter it as just the IP address, I get “Could not connect to MKS: The operation completed successfully”. Thanks James ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [August 30, 2025, 7:53am UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606/2 "2025-08-30T07:53:17Z")
Hello, Have you checked your router? It may be a routing issue, a blocked MAC address, or a blocked IP address. ---
**Author:** ![JamesCRocks](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jamescrocks/32/2195_2.png) [@JamesCRocks](https://forum.sovol3d.com/u/JamesCRocks)\ **Post date:** [August 30, 2025, 10:11am UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606/3 "2025-08-30T10:11:32Z")
I doubt it given that it worked before and the only thing I’ve changed since rebuilding my PC is the wireless password. It’s internal network only and I can access it via a browser, the same PC as my slicer. Is there somewhere that’ll tell me how to configure a wireless connection to my printer? That way, at least I’ll know I’m doing it right. Thanks James ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [August 30, 2025, 1:02pm UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606/4 "2025-08-30T13:02:00Z")
Take a look at the wiki: > **[Sovol 3D Printer Wiki Homepage](https://wiki.sovol3d.com/en/home%20#)** > > The Sovol 3D Printer Wiki is a collection of helpful articles and guides dedicated to our Hardware and Software producs ---
**Author:** ![JamesCRocks](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jamescrocks/32/2195_2.png) [@JamesCRocks](https://forum.sovol3d.com/u/JamesCRocks)\ **Post date:** [August 30, 2025, 3:52pm UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606/5 "2025-08-30T15:52:11Z")
> [@mich0111](#): > > Take a look at the wiki: > > [Sovol 3D Printer Wiki Homepage | Sovol 3D Printer Wiki](https://wiki.sovol3d.com/en/home%20#) Thanks… I’d already been there and couldn’t find anything related to network under either “SV07” or “SV07 Plus” (still can’t) ☹ James ---
**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\ **Post date:** [August 30, 2025, 5:25pm UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606/6 "2025-08-30T17:25:51Z")
If you can connect to Mainsail or Fluidd with a browser the problem must be in Orca. ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/5/5cbd36680149b4a247261fd222883de4b49cf626.png) The stock install on the Klipad doesn’t use a API or certificate. ---
**Author:** ![JamesCRocks](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/jamescrocks/32/2195_2.png) [@JamesCRocks](https://forum.sovol3d.com/u/JamesCRocks)\ **Post date:** [August 30, 2025, 8:25pm UTC](https://forum.sovol3d.com/t/sovol-sv07-plus-orcaslicer-networking/8606/7 "2025-08-30T20:25:46Z")
> [@cardoc](#): > > If you can connect to Mainsail or Fluidd with a browser the problem must be in Orca. > > The stock install on the Klipad doesn’t use a API or certificate. Perfect! Thank you 🙂 James