# Sovol sv07 max extrude cross section problem

**URL:** <https://forum.sovol3d.com/t/sovol-sv07-max-extrude-cross-section-problem/5202>\
**Category:** Sovol Klipperized SV07\
**Created:** [June 22, 2024, 10:41am UTC](https://forum.sovol3d.com/t/sovol-sv07-max-extrude-cross-section-problem/5202 "2024-06-22T10:41:03Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![rofkof](https://avatars.discourse-cdn.com/v4/letter/r/3e96dc/32.png) [@rofkof](https://forum.sovol3d.com/u/rofkof)\
**Post date:** [June 22, 2024, 10:41am UTC](https://forum.sovol3d.com/t/sovol-sv07-max-extrude-cross-section-problem/5202/1 "2024-06-22T10:41:03Z")

</div>

The printer complains that it is over-extruding, even though I am using the default settings in the Orca slicer. This issue occurs only after the first layer if it occurs. The filament and nozzle are properly calibrated. I’ve tried changing the configuration, but the printer refuses to connect to my Windows 11 PC, whether via Wi-Fi or cable.