# Sovol SV06 Won't Power On

**URL:** <https://forum.sovol3d.com/t/sovol-sv06-wont-power-on/4298>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [January 13, 2024, 5:08pm UTC](https://forum.sovol3d.com/t/sovol-sv06-wont-power-on/4298 "2024-01-13T17:08:54Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [January 13, 2024, 10:52pm UTC](https://forum.sovol3d.com/t/sovol-sv06-wont-power-on/4298/3 "2024-01-13T22:52:29Z")

</div>

Some of the SV06’s came with bad power switches…mine included.  
I started having issues at around 2 months & by 6 months I had to replace it.

Before you try to replace it, check the fuse that sits between the plug & the switch. I’ve never had one blow before, but it is a place to start.

Here is a thread on it:

> [@Power switch starting to bug](https://forum.sovol3d.com/t/power-switch-starting-to-bug/2711/2):
>
> My Plus switch so far has been alright, my SV06 switch has been buggy. I bought 2 switches to have as backup if I need them. On the SV06, sometimes the printer doesn’t shut off when I flip the switch.

---

_[View the full topic](https://forum.sovol3d.com/t/sovol-sv06-wont-power-on/4298)._