# Sovol SV06 - When I turn it own, the display just shows an empty screen - SOLVED!

**URL:** <https://forum.sovol3d.com/t/sovol-sv06-when-i-turn-it-own-the-display-just-shows-an-empty-screen-solved/5078>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [May 27, 2024, 10:37am UTC](https://forum.sovol3d.com/t/sovol-sv06-when-i-turn-it-own-the-display-just-shows-an-empty-screen-solved/5078 "2024-05-27T10:37:20Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![noby](https://avatars.discourse-cdn.com/v4/letter/n/e0b2c6/32.png) [@noby](https://forum.sovol3d.com/u/noby)\
**Post date:** [May 27, 2024, 10:37am UTC](https://forum.sovol3d.com/t/sovol-sv06-when-i-turn-it-own-the-display-just-shows-an-empty-screen-solved/5078/1 "2024-05-27T10:37:20Z")

</div>

~~When I turn it own, the display just shows an empty screen. The fans are starting the screen is backlighted but just doesn’t show anything. I don’t have it connected with usb.  
Yesterday it worked, today it doesn’t. What could be the issue?  
Thanks in advance!~~

 

~~What I already tried is to remove the screen and put it on a table and also to flash the firmware using the sd card. Didn’t help.~~  
Problem solved. I had to rename the firmware file to “firmware.bin” now it worked and the printer is alive again.

---

<div class="post-metadata">

**Author:** ![thenetters](https://avatars.discourse-cdn.com/v4/letter/t/b5ac83/32.png) [@thenetters](https://forum.sovol3d.com/u/thenetters)\
**Post date:** [August 2, 2024, 1:01am UTC](https://forum.sovol3d.com/t/sovol-sv06-when-i-turn-it-own-the-display-just-shows-an-empty-screen-solved/5078/2 "2024-08-02T01:01:39Z")

</div>

How did you fix it? I am seeing a blank screen too.