# Sovol SV06 Problém **URL:** \ **Category:** Need Help\ **Tags:** bed-leveling, leveling\ **Created:** [March 1, 2025, 1:25am UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072 "2025-03-01T01:25:52Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Husar](https://avatars.discourse-cdn.com/v4/letter/h/e274bd/32.png) [@Husar](https://forum.sovol3d.com/u/Husar)\ **Post date:** [March 1, 2025, 1:25am UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/1 "2025-03-01T01:25:52Z")
I greet you. I have such a problem, recently I was printing an object and I forgot that I had it on the shelf. The Z-axis crashed into the printout… Unfortunately, I didn’t check it, it’s my fault, I know… But now whenever I want to print something or put auto home, or bed leveling, it crashes into the bed every time… When I leave all the axes at 0, the z-axis doesn’t touch the pad but it’s about 2cm higher… But before I noticed that when the extruder was closer to the bed, it went off, but now it’s always on… I’ve had the printer for a few months, so I don’t know much about it, so I’d appreciate any advice. Do you have any idea how to solve it? Thank you very much ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [March 1, 2025, 2:08am UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/2 "2025-03-01T02:08:37Z")
Let me see if I get what your trying to say… You started a new print but you already had a print of the plate & the Z Axis crashed into it. When you try to home or bed level the nozzle crashes into the plate. The probe no longer blinks when it gets close to the plate. Is this close to what your trying to say…?? ---
**Author:** ![Husar](https://avatars.discourse-cdn.com/v4/letter/h/e274bd/32.png) [@Husar](https://forum.sovol3d.com/u/Husar)\ **Post date:** [March 1, 2025, 2:39am UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/3 "2025-03-01T02:39:58Z")
Yes, it’s exactly as you say… Whatever I want to do is just hit the mat… It won’t stop and just crash ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [March 1, 2025, 3:35am UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/4 "2025-03-01T03:35:52Z")
Read this & see if it helps. > [@Auto Home crashes into bed](https://forum.sovol3d.com/t/auto-home-crashes-into-bed/4909/1): > > Hello, Had to buy a new sensor and after I’ve installed the new one I can’t get the printer to work right. Whenever I try to calibrate it, it has to do an auto home first and it always crashes into the bed so I have to power it off. The sensors red light is on, it is mounted correctly and at the correct height. I flashed the firmware and I reset the eeprom several times. I’ve had the problem before and fixed it but that was a while ago and I can’t recall exactly what I did. ---
**Author:** ![Husar](https://avatars.discourse-cdn.com/v4/letter/h/e274bd/32.png) [@Husar](https://forum.sovol3d.com/u/Husar)\ **Post date:** [March 1, 2025, 11:16am UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/5 "2025-03-01T11:16:57Z")
Several timesI tried to load a new firmware but I don’t know which one is the last one. On the sovol website I found V2 0.0.A but I have it there since I bought the printe ![IMG_20250301_121004](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/0/0bea5cf331bd8094fb5c8ee900755b0f26172cf3.jpeg) r… ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [March 1, 2025, 11:36am UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/6 "2025-03-01T11:36:51Z")
You don’t need to install any firmware…that won’t fix anything. You just need to reset your Z-Offset & maybe your probe. I’ll be gone most of today & tomorrow, so someone else may help you. ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [March 1, 2025, 2:17pm UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/7 "2025-03-01T14:17:49Z")
You can also check if the probe is correctly positioned. By removing a printed model from the plate, you can touch the probe, which can disrupt it. ---
**Author:** ![pman](https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/32.png) [@pman](https://forum.sovol3d.com/u/pman)\ **Post date:** [March 3, 2025, 9:48pm UTC](https://forum.sovol3d.com/t/sovol-sv06-problem/7072/8 "2025-03-03T21:48:00Z")
Several folks have done that. (Me, too.) That usually ends up pushing the sensor up into the black tube. You will have to take the extruder cover off and push the sensor back down. The sensor has to be able to sense the metal print bed.