# Sovol sv06 plus very low to start print

**URL:** <https://forum.sovol3d.com/t/sovol-sv06-plus-very-low-to-start-print/3390>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** advice, heat-fails\
**Created:** [August 31, 2023, 1:59am UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-very-low-to-start-print/3390 "2023-08-31T01:59:28Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![john1](https://avatars.discourse-cdn.com/v4/letter/j/e9bcb4/32.png) [@john1](https://forum.sovol3d.com/u/john1)\
**Post date:** [August 31, 2023, 1:59am UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-very-low-to-start-print/3390/1 "2023-08-31T01:59:28Z")

</div>

Very weird and annoying problem with my sv06 plus when I want to start a print. It seems that my printer first is trying to reach 150 degrees for whatever reason, waiting, and again try to reach but this time the correct 215 degrees before print. Also, it took a while to start at 60 degree heatbed. Some time it is stuck at 59 for 30 seconds or more.

It’s not really a big problem, since sv06 plus is printing well, but it’s very boring, does someone have this problem and tried to resolve it? Thanks

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [August 31, 2023, 6:30am UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-very-low-to-start-print/3390/2 "2023-08-31T06:30:41Z")

</div>

Hello,  
You should analyze your gcode to ensure that it is not the commands transmitted to the printer that are executed.