# Sovol SV06 plus Prusa Start G-code

**URL:** <https://forum.sovol3d.com/t/sovol-sv06-plus-prusa-start-g-code/2439>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [April 27, 2023, 6:59pm UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-prusa-start-g-code/2439 "2023-04-27T18:59:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Chutky](https://avatars.discourse-cdn.com/v4/letter/c/bcef8e/32.png) [@Chutky](https://forum.sovol3d.com/u/Chutky)\
**Post date:** [April 27, 2023, 6:59pm UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-prusa-start-g-code/2439/1 "2023-04-27T18:59:42Z")

</div>

Write me pls your PrusaSlicer 2.5.2 START G-Code for Sovol SV0+6 plus

thx