# Sovol SV06 Plus just stopping during print

**URL:** <https://forum.sovol3d.com/t/sovol-sv06-plus-just-stopping-during-print/4795>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [April 1, 2024, 10:36pm UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-just-stopping-during-print/4795 "2024-04-01T22:36:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tbigfish88](https://avatars.discourse-cdn.com/v4/letter/t/7cd45c/32.png) [@tbigfish88](https://forum.sovol3d.com/u/tbigfish88)\
**Post date:** [April 1, 2024, 10:36pm UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-just-stopping-during-print/4795/1 "2024-04-01T22:36:43Z")

</div>

Hi,

Had my printer for a couple of months, no problems so far, but now it keeps stopping mid-print. It hasn’t run out of filament, there are no signs of the print going wrong. The UI is soft-locked, so if I press pause of stop, it asks me to confirm but then doesn’t do anything.

Any ideas?

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [April 2, 2024, 2:59am UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-just-stopping-during-print/4795/2 "2024-04-02T02:59:59Z")

</div>

Check the Filament Sensor…is it on the mount tight…??  
Is the filament at a weird angle…??  
Some users have had issues with Transparent Filaments & TPU.

A screenshot would help.

---

<div class="post-metadata">

**Author:** ![tbigfish88](https://avatars.discourse-cdn.com/v4/letter/t/7cd45c/32.png) [@tbigfish88](https://forum.sovol3d.com/u/tbigfish88)\
**Post date:** [April 2, 2024, 8:05am UTC](https://forum.sovol3d.com/t/sovol-sv06-plus-just-stopping-during-print/4795/3 "2024-04-02T08:05:36Z")

</div>

Checked all of those things, and it’s fine.

I think I might have solved it. I reformatted the SD Card and copied the gcode on again, and it seems to be working.