# Sovol SV06 dopo la stampa in riaccensione schermo vuoto

**URL:** <https://forum.sovol3d.com/t/sovol-sv06-dopo-la-stampa-in-riaccensione-schermo-vuoto/6468>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [January 4, 2025, 1:31pm UTC](https://forum.sovol3d.com/t/sovol-sv06-dopo-la-stampa-in-riaccensione-schermo-vuoto/6468 "2025-01-04T13:31:41Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Gio-Rc](https://avatars.discourse-cdn.com/v4/letter/g/839c29/32.png) [@Gio-Rc](https://forum.sovol3d.com/u/Gio-Rc)\
**Post date:** [January 4, 2025, 1:31pm UTC](https://forum.sovol3d.com/t/sovol-sv06-dopo-la-stampa-in-riaccensione-schermo-vuoto/6468/1 "2025-01-04T13:31:41Z")

</div>

Buongiorno dopo ogni stampa eseguita spengo la stampante la riaccendo per eseguire altra stampa ma ha lo schermo vuoto sono costretto a caricare il firmware per ripartire cosa succede?  
Qualcuno mi può aiutare.grazie

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [January 4, 2025, 1:40pm UTC](https://forum.sovol3d.com/t/sovol-sv06-dopo-la-stampa-in-riaccensione-schermo-vuoto/6468/2 "2025-01-04T13:40:26Z")

</div>

Hi,  
Not sure to understand your issue.  
Why do you turn off your printer after each print ?

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [January 4, 2025, 4:37pm UTC](https://forum.sovol3d.com/t/sovol-sv06-dopo-la-stampa-in-riaccensione-schermo-vuoto/6468/3 "2025-01-04T16:37:16Z")

</div>

Email Sovol with a video.

[info@sovol3d.com](mailto:info@sovol3d.com)

---

<div class="post-metadata">

**Author:** ![Gio-Rc](https://avatars.discourse-cdn.com/v4/letter/g/839c29/32.png) [@Gio-Rc](https://forum.sovol3d.com/u/Gio-Rc)\
**Post date:** [January 5, 2025, 4:14pm UTC](https://forum.sovol3d.com/t/sovol-sv06-dopo-la-stampa-in-riaccensione-schermo-vuoto/6468/4 "2025-01-05T16:14:54Z")

</div>

Spengo la stampante perché ho finito il lavoro  
Ma poi il giorno dopo accendo e devo caricare il firmware  
Perché lo schermo è vuoto.  
Ogni volta che la spengo finito tutte le stampe  
La riaccendo e per stampare devo caricare il firmware

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [January 5, 2025, 4:38pm UTC](https://forum.sovol3d.com/t/sovol-sv06-dopo-la-stampa-in-riaccensione-schermo-vuoto/6468/5 "2025-01-05T16:38:17Z")

</div>

Ok, now I understand.  
Follow the advice of @Lion , open a ticket at [info@sovol3d.com](mailto:info@sovol3d.com).