# Sovol SV06 blank screen

**URL:** <https://forum.sovol3d.com/t/sovol-sv06-blank-screen/3437>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [September 7, 2023, 8:49am UTC](https://forum.sovol3d.com/t/sovol-sv06-blank-screen/3437 "2023-09-07T08:49:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gasereldib](https://avatars.discourse-cdn.com/v4/letter/g/b2d939/32.png) [@gasereldib](https://forum.sovol3d.com/u/gasereldib)\
**Post date:** [September 7, 2023, 8:49am UTC](https://forum.sovol3d.com/t/sovol-sv06-blank-screen/3437/1 "2023-09-07T08:49:55Z")

</div>

Hello, I bought Sovol SV06 in mid-July, I faced a problem two days ago that the display is not working while the whole printer is working fine. I checked it with a USB cable and it worked when I connected the printer to my laptop or to a power bank and it could work and print, however, when I disconnected it, it didn’t work again. I tried to put the last Firmware again but the printer already has the previous Firmware. So please tell me what should be done exactly?

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [September 7, 2023, 12:19pm UTC](https://forum.sovol3d.com/t/sovol-sv06-blank-screen/3437/2 "2023-09-07T12:19:50Z")

</div>

I had this happen once, restarting the printer did not fit it…but shutting it off & restarting it 30 min later did.  
I don’t know what it was or what caused it, but I haven’t seen it since.