# Sovol SV05 retraction settings

**URL:** <https://forum.sovol3d.com/t/sovol-sv05-retraction-settings/2079>\
**Category:** Sovol SV05 Cubic DD\
**Created:** [March 28, 2023, 9:58am UTC](https://forum.sovol3d.com/t/sovol-sv05-retraction-settings/2079 "2023-03-28T09:58:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![VemsHelst](https://avatars.discourse-cdn.com/v4/letter/v/a8b319/32.png) [@VemsHelst](https://forum.sovol3d.com/u/VemsHelst)\
**Post date:** [March 28, 2023, 9:58am UTC](https://forum.sovol3d.com/t/sovol-sv05-retraction-settings/2079/1 "2023-03-28T09:58:53Z")

</div>

Hi!  
I have a SV05 and I´m wondering if anyone can share their retraction settings? I don´t see any differense on my testprints, they all look the same… I´m using 1 mm retraction and 50 mm/s speed at the moment but it gives a lot of stringing…  
Best regards