# SOV6 Plus in den Prusa Slicer integrieren

**URL:** https://forum.sovol3d.com/t/sov6-plus-in-den-prusa-slicer-integrieren/3031
**Category:** Sovol SV06 Plus
**Created:** [July 6, 2023, 1:23pm UTC](https://forum.sovol3d.com/t/sov6-plus-in-den-prusa-slicer-integrieren/3031 "2023-07-06T13:23:18Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![gebuwa](https://avatars.discourse-cdn.com/v4/letter/g/958977/32.png) [@gebuwa](https://forum.sovol3d.com/u/gebuwa)
#### Post date: [July 6, 2023, 1:23pm UTC](https://forum.sovol3d.com/t/sov6-plus-in-den-prusa-slicer-integrieren/3031/1 "2023-07-06T13:23:18Z")

</div>

I want to integrate the SOVOL 6 Plus into the Prusaslicer and I can’t do it alone. Prusa Slicer 2.6. Is installed. Who can help me?

best regards  
Gerd

---

<div class="post-metadata">

### Author: ![Bronsmotor](https://avatars.discourse-cdn.com/v4/letter/b/a88e57/32.png) [@Bronsmotor](https://forum.sovol3d.com/u/Bronsmotor)
#### Post date: [July 6, 2023, 9:05pm UTC](https://forum.sovol3d.com/t/sov6-plus-in-den-prusa-slicer-integrieren/3031/2 "2023-07-06T21:05:58Z")

</div>

Search sv06 plus on printables there are profiles on there i have the mak profiles but i believe there are 1 or 2 more