# SO-2 10W Focus Distance

**URL:** <https://forum.sovol3d.com/t/so-2-10w-focus-distance/4145>\
**Category:** Laser Engraving\
**Created:** [December 26, 2023, 3:09am UTC](https://forum.sovol3d.com/t/so-2-10w-focus-distance/4145 "2023-12-26T03:09:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![JohnTro](https://avatars.discourse-cdn.com/v4/letter/j/47e85d/32.png) [@JohnTro](https://forum.sovol3d.com/u/JohnTro)\
**Post date:** [December 26, 2023, 3:09am UTC](https://forum.sovol3d.com/t/so-2-10w-focus-distance/4145/1 "2023-12-26T03:09:40Z")

</div>

What is the focus distance for the 10W SO-2 laser?  
Is this focus distance to the top of the work piece?  
As work piece thickness increases, should the z height offset change?
