# Slicer front fans?

**URL:** <https://forum.sovol3d.com/t/slicer-front-fans/619>\
**Category:** Sovol SV04 IDEX\
**Created:** [September 30, 2022, 4:26pm UTC](https://forum.sovol3d.com/t/slicer-front-fans/619 "2022-09-30T16:26:41Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![3pendrgn](https://avatars.discourse-cdn.com/v4/letter/3/5f9b8f/32.png) [@3pendrgn](https://forum.sovol3d.com/u/3pendrgn)\
**Post date:** [September 30, 2022, 4:26pm UTC](https://forum.sovol3d.com/t/slicer-front-fans/619/1 "2022-09-30T16:26:41Z")

</div>

Is there a way to turn off just the front fans in the cura slicer? They mess up my idex prints by cooling down the filiment so much it causes underextrusion and i don’t think it’s safre to turn off the side fans. I can turn off the front fans on the touch display but i wanna do it in the slicer.