# Setup - Aux Leveling will not run

**URL:** <https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302>\
**Category:** Sovol SV04 IDEX\
**Created:** [April 16, 2023, 5:19pm UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302 "2023-04-16T17:19:11Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![crummer](https://avatars.discourse-cdn.com/v4/letter/c/53a042/32.png) [@crummer](https://forum.sovol3d.com/u/crummer)\
**Post date:** [April 16, 2023, 5:19pm UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/1 "2023-04-16T17:19:11Z")

</div>

Hi all I am looking for some help. I just received my SV04 and I am trying to perform the AUX Level and no matter what I do when I start the process from the touch screen the printer will not move off of position 1. Any help is appreciated.

Again this is a new out of box printer and I can’t get past this step in the installation. - Frustrating!

---

<div class="post-metadata">

**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\
**Post date:** [April 16, 2023, 6:38pm UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/2 "2023-04-16T18:38:01Z")

</div>

Try a firmware update.

---

<div class="post-metadata">

**Author:** ![crummer](https://avatars.discourse-cdn.com/v4/letter/c/53a042/32.png) [@crummer](https://forum.sovol3d.com/u/crummer)\
**Post date:** [April 16, 2023, 9:17pm UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/3 "2023-04-16T21:17:56Z")

</div>

I’ll give that a try and will post on the outcome.

---

<div class="post-metadata">

**Author:** ![crummer](https://avatars.discourse-cdn.com/v4/letter/c/53a042/32.png) [@crummer](https://forum.sovol3d.com/u/crummer)\
**Post date:** [April 17, 2023, 3:26am UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/4 "2023-04-17T03:26:14Z")

</div>

still the same results after flashing to 1.1.0.

---

<div class="post-metadata">

**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\
**Post date:** [April 17, 2023, 5:30am UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/5 "2023-04-17T05:30:09Z")

</div>

Well, this sounds strange - did you try homing & heating up left nozzle + printbed before starting aux levelling?

---

<div class="post-metadata">

**Author:** ![crummer](https://avatars.discourse-cdn.com/v4/letter/c/53a042/32.png) [@crummer](https://forum.sovol3d.com/u/crummer)\
**Post date:** [April 17, 2023, 11:11am UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/6 "2023-04-17T11:11:34Z")

</div>

Yes. It homes and heats up fine after that nothing. I’m pretty much at a loss at this point.

---

<div class="post-metadata">

**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\
**Post date:** [April 17, 2023, 5:29pm UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/7 "2023-04-17T17:29:37Z")

</div>

In that case I would try Brandon Phillips’ Firmware - he added some useful updates to aux leveling including auto tramming. His latest firmware is [here](https://github.com/bphillips09/SV04-IDEX-3D-Printer-Mainboard-Source-code/releases/tag/V1.1.B3.3). Please note that this firmware needs an additional display software update that can be found [here](https://github.com/bphillips09/SV04-Touchscreen/releases).

---

<div class="post-metadata">

**Author:** ![crummer](https://avatars.discourse-cdn.com/v4/letter/c/53a042/32.png) [@crummer](https://forum.sovol3d.com/u/crummer)\
**Post date:** [April 30, 2023, 3:31am UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/8 "2023-04-30T03:31:47Z")

</div>

Just wanted to thank you. With the help of support from Sovol themselves I was able to resolve my issue.

---

<div class="post-metadata">

**Author:** ![Beaukraft](https://avatars.discourse-cdn.com/v4/letter/b/9f8e36/32.png) [@Beaukraft](https://forum.sovol3d.com/u/Beaukraft)\
**Post date:** [February 11, 2024, 5:57pm UTC](https://forum.sovol3d.com/t/setup-aux-leveling-will-not-run/2302/9 "2024-02-11T17:57:14Z")

</div>

I’m glad you were able to resolve your problem. Could you please share how you were able to fix the problem with Sovol Tech Support?? I have a similar problem (touchscreen is unresponsive after first Aux Leveling move). I’m working through ALL the different threads of advice (without success). Could you please share what worked for you? Thank you.
