# Settings for 1.0mm nozzle Printing!? **URL:** \ **Category:** Sovol SV06 Plus\ **Created:** [August 20, 2023, 11:38pm UTC](https://forum.sovol3d.com/t/settings-for-1-0mm-nozzle-printing/3330 "2023-08-20T23:38:07Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![lord-h3lmch3n](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lord-h3lmch3n/32/1060_2.png) [@lord-h3lmch3n](https://forum.sovol3d.com/u/lord-h3lmch3n)\ **Post date:** [August 20, 2023, 11:38pm UTC](https://forum.sovol3d.com/t/settings-for-1-0mm-nozzle-printing/3330/1 "2023-08-20T23:38:07Z")
hi folks, i bought the hardened nozzle set and in this set there is a nozzle with 1.00mm diameter. now i ask me wich settings i need to change in prusaslicer (with this sliceer i got the best results) i found the point where i can change nozzle diameter. BUT is that enough? did i change also the layer high to maybe 1.00? or less? can i print in same speed as my other prints will do? does anyone have printed with sv06+ with this nozzle before? i also have cura installed and adjusted. tell me whats your ideas about the settings what would you change to print with that fat nozzle? ---
**Author:** ![ProfessorMeteor](https://avatars.discourse-cdn.com/v4/letter/p/4491bb/32.png) [@ProfessorMeteor](https://forum.sovol3d.com/u/ProfessorMeteor)\ **Post date:** [August 27, 2023, 12:22am UTC](https://forum.sovol3d.com/t/settings-for-1-0mm-nozzle-printing/3330/2 "2023-08-27T00:22:25Z")
Haven’t done it on my Sovol SV06+, or all the way up to a 1.0mm On my AnyCubic Mega P I used a 0.8mm and had to up my temp to 210 - 215 C otherwise kept just about everything the same. Double check number of outer walls compared to outer wall size, I had an issue of failed prints to too many walls placed right on top of each other same Z height. ---
**Author:** ![lord-h3lmch3n](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lord-h3lmch3n/32/1060_2.png) [@lord-h3lmch3n](https://forum.sovol3d.com/u/lord-h3lmch3n)\ **Post date:** [August 27, 2023, 5:07pm UTC](https://forum.sovol3d.com/t/settings-for-1-0mm-nozzle-printing/3330/3 "2023-08-27T17:07:19Z")
THX for info I will try it in a few days.