# Set Up's - Auto Levelling - Z Axis

**URL:** <https://forum.sovol3d.com/t/set-ups-auto-levelling-z-axis/3778>\
**Category:** Sovol SV06 Plus\
**Created:** [October 28, 2023, 7:30am UTC](https://forum.sovol3d.com/t/set-ups-auto-levelling-z-axis/3778 "2023-10-28T07:30:13Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![RAIL01](https://avatars.discourse-cdn.com/v4/letter/r/ea5d25/32.png) [@RAIL01](https://forum.sovol3d.com/u/RAIL01)\
**Post date:** [October 28, 2023, 7:30am UTC](https://forum.sovol3d.com/t/set-ups-auto-levelling-z-axis/3778/1 "2023-10-28T07:30:13Z")

</div>

Hello, I am not quite sure whether it is necessary to undertake the Auto Levelling, Z-Axis offsets etc every time the printer is switched on anew. Sometimes I have just gone to print straight away and print works. Other times the print has failed and I have undertaken the set up offsets. Thanks in advance.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [October 28, 2023, 4:25pm UTC](https://forum.sovol3d.com/t/set-ups-auto-levelling-z-axis/3778/2 "2023-10-28T16:25:52Z")

</div>

Hello,  
To solve the leveling problem, you can use this :

> **[synchronisation de l’axe Z pour la SOVOL SV06 Plus](https://cults3d.com/fr/mod%C3%A8le-3d/outil/synchronisation-de-l-axe-z-pour-la-sovol-sv06-plus)**
>
> Voici la synchronisation de l'axe Z SOVOL SV06 PLUS
> Je propose de réaliser un montage qui permet de conserver un leveling constant.
> 
> Le montage est facile avec un tuto qui explique les étapes du montage. document PDF (montage de la Synchro axes Z)
> ...

Since I installed it I have no longer leveled the bed.

---

<div class="post-metadata">

**Author:** ![RAIL01](https://avatars.discourse-cdn.com/v4/letter/r/ea5d25/32.png) [@RAIL01](https://forum.sovol3d.com/u/RAIL01)\
**Post date:** [October 28, 2023, 6:50pm UTC](https://forum.sovol3d.com/t/set-ups-auto-levelling-z-axis/3778/3 "2023-10-28T18:50:37Z")

</div>

Many thanks, I’ll check out the suggestion.

---

<div class="post-metadata">

**Author:** ![DBMandrake](https://avatars.discourse-cdn.com/v4/letter/d/439d5e/32.png) [@DBMandrake](https://forum.sovol3d.com/u/DBMandrake)\
**Post date:** [October 30, 2023, 11:12am UTC](https://forum.sovol3d.com/t/set-ups-auto-levelling-z-axis/3778/4 "2023-10-30T11:12:31Z")

</div>

> [@RAIL01](#):
>
> Hello, I am not quite sure whether it is necessary to undertake the Auto Levelling, Z-Axis offsets etc every time the printer is switched on anew. Sometimes I have just gone to print straight away and print works. Other times the print has failed and I have undertaken the set up offsets. Thanks in advance.

Assuming you leave the printer alone between prints (aside from changing spools) and don’t pick it up and move it around it shouldn’t go out of adjustment.

It shouldn’t be necessary to do any levelling etc before each print - I certainly don’t do that, and very rarely have any issue. I just keep printing without doing any adjustments until I notice an issue with the first layer.

The only one I occasionally find myself having to tweak is the z-axis offset to get a perfect first layer, but you’re only talking about adjusting it 0.05mm or so.

---

<div class="post-metadata">

**Author:** ![RAIL01](https://avatars.discourse-cdn.com/v4/letter/r/ea5d25/32.png) [@RAIL01](https://forum.sovol3d.com/u/RAIL01)\
**Post date:** [October 30, 2023, 12:20pm UTC](https://forum.sovol3d.com/t/set-ups-auto-levelling-z-axis/3778/5 "2023-10-30T12:20:23Z")

</div>

Many thanks. I’ll try the approach.