# Set the correct time zone

**URL:** <https://forum.sovol3d.com/t/set-the-correct-time-zone/4042>\
**Category:** Sovol Klipperized SV07\
**Tags:** firmware\
**Created:** [December 8, 2023, 8:44pm UTC](https://forum.sovol3d.com/t/set-the-correct-time-zone/4042 "2023-12-08T20:44:21Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![gregma](https://avatars.discourse-cdn.com/v4/letter/g/f6c823/32.png) [@gregma](https://forum.sovol3d.com/u/gregma)\
**Post date:** [December 8, 2023, 8:44pm UTC](https://forum.sovol3d.com/t/set-the-correct-time-zone/4042/1 "2023-12-08T20:44:21Z")

</div>

SV07+. Set everything up, printing well. I’m still perplexed about not having my local time zone. All that showed up for America is two time zones. New York and Toronto. I really would like to be able to move away from it’s current setting of UTC. Any way I can set it to say… PST? Los Angeles? The official America/Los\_Angeles?

-gregma

---

<div class="post-metadata">

**Author:** ![xxduffyxx](https://avatars.discourse-cdn.com/v4/letter/x/8baadc/32.png) [@xxduffyxx](https://forum.sovol3d.com/u/xxduffyxx)\
**Post date:** [December 25, 2023, 1:43pm UTC](https://forum.sovol3d.com/t/set-the-correct-time-zone/4042/2 "2023-12-25T13:43:20Z")

</div>

In the Printer setting through WiFi you can correct the time to your local time, it’s in the settings options.

---

<div class="post-metadata">

**Author:** ![FlightSpotting](https://avatars.discourse-cdn.com/v4/letter/f/b4bc9f/32.png) [@FlightSpotting](https://forum.sovol3d.com/u/FlightSpotting)\
**Post date:** [June 8, 2024, 5:55pm UTC](https://forum.sovol3d.com/t/set-the-correct-time-zone/4042/3 "2024-06-08T17:55:57Z")

</div>

see my fix here: [Klipper Screen Timezone Fix](https://forum.sovol3d.com/t/klipper-screen-timezone-fix/5131)