# Screen failure on SV07 plus **URL:** https://forum.sovol3d.com/t/screen-failure-on-sv07-plus/9690 **Category:** Sovol Klipperized SV07 **Tags:** klipper **Created:** [March 3, 2026, 2:23pm UTC](https://forum.sovol3d.com/t/screen-failure-on-sv07-plus/9690 "2026-03-03T14:23:27Z") **Posts on this page:** 5 **Page:** 1
### Author: ![loulnux](https://avatars.discourse-cdn.com/v4/letter/l/94ad74/32.png) [@loulnux](https://forum.sovol3d.com/u/loulnux) #### Post date: [March 3, 2026, 2:23pm UTC](https://forum.sovol3d.com/t/screen-failure-on-sv07-plus/9690/1 "2026-03-03T14:23:27Z")
Screen failure: the system seems to reboot at the startup animation; this cycle is endless. However, the printer remains fully functional via the intranet interface. I just can no longer control it manually. Any ideas? ---
### Author: ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc) #### Post date: [March 3, 2026, 3:11pm UTC](https://forum.sovol3d.com/t/screen-failure-on-sv07-plus/9690/2 "2026-03-03T15:11:49Z")
Is a new issue to me. Bootloops are a common problem but normally klipper/moonraker never start. Can you use the web UI to stop Klipperscreen? ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/1705f6318d656acbdaa84d05d16cefb44868c4e0.jpeg) Can you get a SSH session? If so I’d use kiauh to uninstall klipperscreen. Then on a reboot the screen should stay in text mode. ---
### Author: ![loulnux](https://avatars.discourse-cdn.com/v4/letter/l/94ad74/32.png) [@loulnux](https://forum.sovol3d.com/u/loulnux) #### Post date: [March 3, 2026, 5:45pm UTC](https://forum.sovol3d.com/t/screen-failure-on-sv07-plus/9690/3 "2026-03-03T17:45:30Z")
I could reach Stop Klipperscreen by UI but it had no visible effect even after hard rebooting. Screen still cycles on the graphic intro ---
### Author: ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc) #### Post date: [March 3, 2026, 8:02pm UTC](https://forum.sovol3d.com/t/screen-failure-on-sv07-plus/9690/4 "2026-03-03T20:02:04Z")
Can you establish a SSH connection? ---
### Author: ![MayPrinting](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mayprinting/32/6314_2.png) [@MayPrinting](https://forum.sovol3d.com/u/MayPrinting) #### Post date: [March 26, 2026, 6:07am UTC](https://forum.sovol3d.com/t/screen-failure-on-sv07-plus/9690/5 "2026-03-26T06:07:53Z")
Like already mentioned from @cardoc, try to connect via SSH. You can also just grab a USB drive, copy the original update.deb on it, connect it to the Klippad and let it do a Softwareupdate. No data loss, no SSH. [update files](https://drive.google.com/drive/folders/10OwQUHGtp0wLJ-Es8r0qcBh8Pv-v-0eZ?usp=sharing)