# S05 printer starts printing from the front left corner. nothing seems to correct it

**URL:** <https://forum.sovol3d.com/t/s05-printer-starts-printing-from-the-front-left-corner-nothing-seems-to-correct-it/945>\
**Category:** Sovol SV05 Cubic DD\
**Created:** [December 2, 2022, 8:02pm UTC](https://forum.sovol3d.com/t/s05-printer-starts-printing-from-the-front-left-corner-nothing-seems-to-correct-it/945 "2022-12-02T20:02:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![COCHISE1999](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/cochise1999/32/315_2.png) [@COCHISE1999](https://forum.sovol3d.com/u/COCHISE1999)\
**Post date:** [December 2, 2022, 8:02pm UTC](https://forum.sovol3d.com/t/s05-printer-starts-printing-from-the-front-left-corner-nothing-seems-to-correct-it/945/1 "2022-12-02T20:02:00Z")

</div>

I have struggled with the weak manual and the lack of support for this printer. I have committed to it and I must resolve the issues of false settings retention.

---

<div class="post-metadata">

**Author:** ![COCHISE1999](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/cochise1999/32/315_2.png) [@COCHISE1999](https://forum.sovol3d.com/u/COCHISE1999)\
**Post date:** [December 3, 2022, 6:55am UTC](https://forum.sovol3d.com/t/s05-printer-starts-printing-from-the-front-left-corner-nothing-seems-to-correct-it/945/2 "2022-12-03T06:55:31Z")

</div>

The issue was on me.  
(1) I failed to slow down, evaluate how the printer works and study the manual. I discovered the logical sequence of events and was rewarded with a decent print.  
(2) I also failed to check the supplied graphics on the SD card. I re sliced and aligned them, the issue went away.