# Replacement hotend and heatbreak for SV06 **URL:** \ **Category:** Sovol SV06 Fully Open Source 3D Printer\ **Created:** [March 19, 2023, 4:52pm UTC](https://forum.sovol3d.com/t/replacement-hotend-and-heatbreak-for-sv06/2007 "2023-03-19T16:52:41Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Timpraetor](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/timpraetor/32/268_2.png) [@Timpraetor](https://forum.sovol3d.com/u/Timpraetor)\ **Post date:** [March 19, 2023, 4:52pm UTC](https://forum.sovol3d.com/t/replacement-hotend-and-heatbreak-for-sv06/2007/1 "2023-03-19T16:52:41Z")
Hi to all of the modders out there. My SV06 is currently offline because of a completely hosed hot end block and heat break - a loose nozzle caused bad filament flow resulting in the heater and thermistor wires becoming completely mangled. I have replacements on order from Sovol, but they are taking forever. Do any of you know of a compatible replacement heater block that can be installed using the existing assembly? ---
**Author:** ![Juhzuri](https://avatars.discourse-cdn.com/v4/letter/j/da6949/32.png) [@Juhzuri](https://forum.sovol3d.com/u/Juhzuri)\ **Post date:** [March 23, 2023, 8:48am UTC](https://forum.sovol3d.com/t/replacement-hotend-and-heatbreak-for-sv06/2007/2 "2023-03-23T08:48:00Z")
This is why I ended up ordering a backup hotend from their US Amazon store. Getting one from China took forever on a previous order. YMMV though on speed of Amazon. Mine was: Ordered on Mar 9th, received on Mar 11th through Amazon. ---
**Author:** ![Timpraetor](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/timpraetor/32/268_2.png) [@Timpraetor](https://forum.sovol3d.com/u/Timpraetor)\ **Post date:** [March 24, 2023, 7:32pm UTC](https://forum.sovol3d.com/t/replacement-hotend-and-heatbreak-for-sv06/2007/3 "2023-03-24T19:32:41Z")
My order arrived today and the 3D printing world will never be the same 🙂