# Replacement Exctruter **URL:** \ **Category:** Sovol SV01 Pro\ **Created:** [May 25, 2023, 1:36am UTC](https://forum.sovol3d.com/t/replacement-exctruter/2673 "2023-05-25T01:36:01Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![Yota](https://avatars.discourse-cdn.com/v4/letter/y/76d3ee/32.png) [@Yota](https://forum.sovol3d.com/u/Yota)\ **Post date:** [May 25, 2023, 1:36am UTC](https://forum.sovol3d.com/t/replacement-exctruter/2673/1 "2023-05-25T01:36:01Z")
Need to replace or upgrade my exctruder. I am finding NOTHING on what’s compatible with this thing or where to go to simply replace what I have. Not that I wish this on anyone, but I am hopeful someone out there has found a good replacement exctruter. Which brings up another topic. Parts in general? I find plenty for the SV01, SV04 and some for the SV06. There is nothing out there on the SV01Pro… ---
**Author:** ![Yota](https://avatars.discourse-cdn.com/v4/letter/y/76d3ee/32.png) [@Yota](https://forum.sovol3d.com/u/Yota)\ **Post date:** [July 18, 2023, 1:52am UTC](https://forum.sovol3d.com/t/replacement-exctruter/2673/2 "2023-07-18T01:52:21Z")
Bottom line, they don’t care. I’ve been in the same boat for months. Lesson learned ---
**Author:** ![LR514](https://avatars.discourse-cdn.com/v4/letter/l/e19adc/32.png) [@LR514](https://forum.sovol3d.com/u/LR514)\ **Post date:** [July 20, 2023, 4:37am UTC](https://forum.sovol3d.com/t/replacement-exctruter/2673/3 "2023-07-20T04:37:21Z")
There isn’t much available unfortunately; some parts listed for the SV04 are interchangeable. As far as extruder replacements go there’s someone in another thread here who recently wrote about installing a Creality Sprite Pro and there are a few on the Facebook group running the Biqu H2V2, the models to install that are on Printables. ---
**Author:** ![albertsierra](https://avatars.discourse-cdn.com/v4/letter/a/13edae/32.png) [@albertsierra](https://forum.sovol3d.com/u/albertsierra)\ **Post date:** [April 6, 2024, 1:11pm UTC](https://forum.sovol3d.com/t/replacement-exctruter/2673/4 "2024-04-06T13:11:08Z")
Same problem for the last few months. Even located an original replacement, but adding just a little more of cash, I’ve purchased an REVO Hemera XS. My problem now, it’s spinning in the wrong direction, no matter what I put in Marlin. ---
**Author:** ![helijeff](https://avatars.discourse-cdn.com/v4/letter/h/a698b9/32.png) [@helijeff](https://forum.sovol3d.com/u/helijeff)\ **Post date:** [March 19, 2025, 10:06am UTC](https://forum.sovol3d.com/t/replacement-exctruter/2673/5 "2025-03-19T10:06:13Z")
I contacted sovol directly by email and they sent me a link to purchase the complete extruder assembly for $55. 00 which included shipping, I recieved it about a week later. Same exact one ,so dont listen to those who tell you sovol does’nt care or respond they do and thwey are great. Any experience I have ever had with them was very responsive and great !!!