# Replacement build plate for SV04

**URL:** <https://forum.sovol3d.com/t/replacement-build-plate-for-sv04/1649>\
**Category:** Sovol SV04 IDEX\
**Tags:** swap\
**Created:** [February 13, 2023, 10:16pm UTC](https://forum.sovol3d.com/t/replacement-build-plate-for-sv04/1649 "2023-02-13T22:16:42Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\
**Post date:** [February 14, 2023, 7:22am UTC](https://forum.sovol3d.com/t/replacement-build-plate-for-sv04/1649/2 "2023-02-14T07:22:37Z")

</div>

There I wrote how I replaced it:

> [@Glass bed on the SV04](https://forum.sovol3d.com/t/glass-bed-on-the-sv04/253/12):
>
> Hi there, the printing bed surface of my SV04 worked well just for a few days. Despite exact bed leveling & cleaning my prints warped or did not even stick to surface without any extra adhesion stuff. I had been using a FR4 fiberglass plate on my SV01 printer for years without any adhesion issues at all. Therefore I got rid it of that pesky bed coating & put a matching 1mm FR4 plate to the metal plate instead. The bed coating was easy to remove with a hot-air gun. The remaining glue on the met…

Those 310x320mm FR4 plates are cheap & widely available on eBay, Amazon etc.

---

_[View the full topic](https://forum.sovol3d.com/t/replacement-build-plate-for-sv04/1649)._