# QGL, Mainline, Eddy- Taco bed or Motor failure?

**URL:** <https://forum.sovol3d.com/t/qgl-mainline-eddy-taco-bed-or-motor-failure/8358>\
**Category:** Sovol SV08\
**Created:** [July 27, 2025, 3:35pm UTC](https://forum.sovol3d.com/t/qgl-mainline-eddy-taco-bed-or-motor-failure/8358 "2025-07-27T15:35:31Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![cardoc](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/cardoc/32/6926_2.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [July 28, 2025, 5:22pm UTC](https://forum.sovol3d.com/t/qgl-mainline-eddy-taco-bed-or-motor-failure/8358/6 "2025-07-28T17:22:54Z")

</div>

> [@biggy238](#):
>
> I’m going to try to get the magnetic layer flat as described

See:

> [@Taco bed - BTT Eddy - Belt Tension and all the things](https://forum.sovol3d.com/t/taco-bed-btt-eddy-belt-tension-and-all-the-things/7689):
>
> Guys, Let me begin by saying I’ve never been within 10 Feet of a SV08. I am, however, a retired (disabled) mechanical engineer. Having lots of time I read all the forums on here and a couple other places. I see lots of frustration with bed mesh issues causing first layer issues. Many are looking to the BTT Eddy as a solution. Unfortunately the posts from people who have gotten their machines to run with the Eddy report that issues persist. It is my observation that the SV08 bed sensor is M…

---

_[View the full topic](https://forum.sovol3d.com/t/qgl-mainline-eddy-taco-bed-or-motor-failure/8358)._
