# Pull filament direct from a dryer - reverse bowden

**URL:** <https://forum.sovol3d.com/t/pull-filament-direct-from-a-dryer-reverse-bowden/7916>\
**Category:** Sovol SV06 ACE\
**Tags:** advice\
**Created:** [May 29, 2025, 7:13pm UTC](https://forum.sovol3d.com/t/pull-filament-direct-from-a-dryer-reverse-bowden/7916 "2025-05-29T19:13:03Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![KalciumKing](https://avatars.discourse-cdn.com/v4/letter/k/76d3ee/32.png) [@KalciumKing](https://forum.sovol3d.com/u/KalciumKing)\
**Post date:** [June 8, 2025, 12:13pm UTC](https://forum.sovol3d.com/t/pull-filament-direct-from-a-dryer-reverse-bowden/7916/3 "2025-06-08T12:13:03Z")

</div>

![full-setup](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/d/d4d4ae8f96592851a694709b1a806cc71398de8d.jpeg)  
 ![PTFE_printed-part](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/6/661e00f8b5a8d8a8f4fdcc35a0bf4a015f0b95b2.jpeg)  
 ![PTFE-extruder-head](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/3/31a3655a79d6e14f1aa2da82cfb33327d188a368.jpeg)  
 ![PTFE-zip-tie-cable](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/5/5c29caeb0c0b6fcab912d5534a9ffc230dfaadab.jpeg)

How does this look? A piece of PTFE tubing (Capricorn) in the hole of my Sovol filament dryer, held to the frame with a guide ([Sovol SV06 Clip-On Bowden Guide by Brianne | Download free STL model | Printables.com](https://www.printables.com/model/661302-sovol-sv06-clip-on-bowden-guide)) and then as I assume you have, the tubing just held to the extruder head through tension. A zip tie to the cable also helps I think.

---

_[View the full topic](https://forum.sovol3d.com/t/pull-filament-direct-from-a-dryer-reverse-bowden/7916)._