# Priont speed and caculation

**URL:** <https://forum.sovol3d.com/t/priont-speed-and-caculation/2284>\
**Category:** Sovol SV06 Plus\
**Created:** [April 15, 2023, 1:45pm UTC](https://forum.sovol3d.com/t/priont-speed-and-caculation/2284 "2023-04-15T13:45:42Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![ulao\_please\_dnt\_lock](https://avatars.discourse-cdn.com/v4/letter/u/57b2e6/32.png) [@ulao\_please\_dnt\_lock](https://forum.sovol3d.com/u/ulao_please_dnt_lock)\
**Post date:** [April 15, 2023, 1:45pm UTC](https://forum.sovol3d.com/t/priont-speed-and-caculation/2284/1 "2023-04-15T13:45:42Z")

</div>

Wondering how this works.

In cura my speed is 50 mm/s claims 6 hour print  
on printer screen speed 100 claims 12 hour print

What governs the sped and can I sync these two?

---

<div class="post-metadata">

**Author:** ![zenabi\_uematsu](https://avatars.discourse-cdn.com/v4/letter/z/e9c0ed/32.png) [@zenabi\_uematsu](https://forum.sovol3d.com/u/zenabi_uematsu)\
**Post date:** [April 23, 2023, 1:49am UTC](https://forum.sovol3d.com/t/priont-speed-and-caculation/2284/2 "2023-04-23T01:49:58Z")

</div>

I noticed that too. it seems that the firmware always defaults to 100mm/s. I believe this printer is very capable but the firmware for it is nowhere near where it needs to be.  
I think until they do a meaningful update you’ll just have to go in and manually slow down the print speed on the touch screen.

---

<div class="post-metadata">

**Author:** ![bullet0507](https://avatars.discourse-cdn.com/v4/letter/b/ecccb3/32.png) [@bullet0507](https://forum.sovol3d.com/u/bullet0507)\
**Post date:** [April 23, 2023, 10:09am UTC](https://forum.sovol3d.com/t/priont-speed-and-caculation/2284/3 "2023-04-23T10:09:19Z")

</div>

Its not only the print speed which goes wrong.  
My SV06 Plus only takes the BedTemp from the gcode.

Nozzle temp ist 0°C  
Fan 0  
Print speed 100

I already texted Sovol but by now no answer.

Hope this gets fixed soon. Its my first printer and i really like it so far.

---

<div class="post-metadata">

**Author:** ![ulao](https://avatars.discourse-cdn.com/v4/letter/u/278dde/32.png) [@ulao](https://forum.sovol3d.com/u/ulao)\
**Post date:** [April 23, 2023, 1:49pm UTC](https://forum.sovol3d.com/t/priont-speed-and-caculation/2284/4 "2023-04-23T13:49:54Z")

</div>

I also noticed this, even in Cura 4.13 ( not the one they send)

---

<div class="post-metadata">

**Author:** ![bullet0507](https://avatars.discourse-cdn.com/v4/letter/b/ecccb3/32.png) [@bullet0507](https://forum.sovol3d.com/u/bullet0507)\
**Post date:** [April 24, 2023, 5:48am UTC](https://forum.sovol3d.com/t/priont-speed-and-caculation/2284/5 "2023-04-24T05:48:36Z")

</div>

Yes i also used both the Cura that came with the printer and the original in the newest version.  
Only thing noticeable that the prints are better with the original Cura.

---

<div class="post-metadata">

**Author:** ![ulao](https://avatars.discourse-cdn.com/v4/letter/u/278dde/32.png) [@ulao](https://forum.sovol3d.com/u/ulao)\
**Post date:** [May 2, 2023, 3:50am UTC](https://forum.sovol3d.com/t/priont-speed-and-caculation/2284/6 "2023-05-02T03:50:02Z")

</div>

what is the best way to fix this, I have data now and if I can adjust a number in cura I know what ti aim for to make it calculate better.

cura says 13:11  
but took 9:6