# Printing Profiles for SV04 to Simplify3D

**URL:** <https://forum.sovol3d.com/t/printing-profiles-for-sv04-to-simplify3d/291>\
**Category:** Slicer Questions\
**Tags:** simplify3d, SV04\
**Created:** [May 20, 2022, 7:43pm UTC](https://forum.sovol3d.com/t/printing-profiles-for-sv04-to-simplify3d/291 "2022-05-20T19:43:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Alex](https://avatars.discourse-cdn.com/v4/letter/a/db5fbb/32.png) [@Alex](https://forum.sovol3d.com/u/Alex)\
**Post date:** [May 20, 2022, 7:43pm UTC](https://forum.sovol3d.com/t/printing-profiles-for-sv04-to-simplify3d/291/1 "2022-05-20T19:43:11Z")

</div>

Hello, as most parts that I need to print need supports, I chose to buy Simplify3D, since the slicer is capable of producing very good supports.  
But still I can’t get good quality in the parts where the supports are made. So I bought an SV04 believing that using HIPS or PVA filaments will give the quality that I need. However, now I have another question, configure Simplify 3D for Sovol SV04. Also, does anyone have print profiles for SV04 to Simplify 3D?

---

<div class="post-metadata">

**Author:** ![Ciol](https://avatars.discourse-cdn.com/v4/letter/c/e274bd/32.png) [@Ciol](https://forum.sovol3d.com/u/Ciol)\
**Post date:** [May 21, 2022, 3:26am UTC](https://forum.sovol3d.com/t/printing-profiles-for-sv04-to-simplify3d/291/2 "2022-05-21T03:26:41Z")

</div>

I’m sorry I don’t use Simplify3D Alex.  
I use either Ideamaker or Cura.  
For Support I love the Tree Support functionality of Cura so I never bothered looking into other slicers.  
Have you tried this functionality?