# Printing error in one corner

**URL:** <https://forum.sovol3d.com/t/printing-error-in-one-corner/5381>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [July 27, 2024, 12:12pm UTC](https://forum.sovol3d.com/t/printing-error-in-one-corner/5381 "2024-07-27T12:12:40Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dries](https://avatars.discourse-cdn.com/v4/letter/d/8e8cbc/32.png) [@Dries](https://forum.sovol3d.com/u/Dries)\
**Post date:** [July 27, 2024, 12:12pm UTC](https://forum.sovol3d.com/t/printing-error-in-one-corner/5381/1 "2024-07-27T12:12:40Z")

</div>

Hello, since a while, I have alwas the same error in one corner (on the printer: right corner on the back). See picture.

 ![Screenshot 2024-07-27 at 14.06.22](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/13f5703037e7e7624713ae2ceb69262b66764984.jpeg)

All the other corners are all right. Any advice?

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [August 22, 2024, 8:09am UTC](https://forum.sovol3d.com/t/printing-error-in-one-corner/5381/2 "2024-08-22T08:09:12Z")

</div>

Hello,  
Welcome in this forum.  
If you need for help, you should give much more informations about your configuration and what you do exactly (leveling, calibration, settings, filament, …).