# Printing different PLA than the one that came with the machine? SV06 stops after a few layers, no PLA extruded

**URL:** https://forum.sovol3d.com/t/printing-different-pla-than-the-one-that-came-with-the-machine-sv06-stops-after-a-few-layers-no-pla-extruded/1230
**Category:** Sovol SV06 Fully Open Source 3D Printer
**Created:** [January 6, 2023, 5:16pm UTC](https://forum.sovol3d.com/t/printing-different-pla-than-the-one-that-came-with-the-machine-sv06-stops-after-a-few-layers-no-pla-extruded/1230 "2023-01-06T17:16:53Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![sovol3delger](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sovol3delger](https://forum.sovol3d.com/u/sovol3delger)
#### Post date: [January 7, 2023, 1:46pm UTC](https://forum.sovol3d.com/t/printing-different-pla-than-the-one-that-came-with-the-machine-sv06-stops-after-a-few-layers-no-pla-extruded/1230/3 "2023-01-07T13:46:35Z")

</div>

Hi @karlsinn

You may want to have a look at this thread as well:

> [@Sovol SVO6 fails printing around the same layer each time](https://forum.sovol3d.com/t/sovol-svo6-fails-printing-around-the-same-layer-each-time/938):
>
> My printer suddenly keeps failing around the same layer on average (sometimes fails earlier and sometimes later). After it fails I have to manually push filament through to get it working again. This is happening for 3 different rolls of filament including one new roll. Any ideas on what this could be, I have tried varying the temperature without success, I have checked and cleaned the extruder and the nozzle also without success.

Regards

---

_[View the full topic](https://forum.sovol3d.com/t/printing-different-pla-than-the-one-that-came-with-the-machine-sv06-stops-after-a-few-layers-no-pla-extruded/1230)._