# Printer shows always "paused print" **URL:** \ **Category:** Sovol Klipperized SV07\ **Created:** [October 1, 2023, 1:11pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595 "2023-10-01T13:11:28Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![Gokilz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/gokilz/32/1396_2.png) [@Gokilz](https://forum.sovol3d.com/u/Gokilz)\ **Post date:** [October 1, 2023, 1:11pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/1 "2023-10-01T13:11:28Z")
Hello all, I’ve problem with my Sovol SV07. At the moment I can’t do anything with it. If I try to do something (home all, print something, extruder), the printer shows always “paused print”. System restore, new leveling doesn’t help. I already tried even to replace the filament. Nothing help. It shows always that “paused print”. In the log file I didn’t see any error msg. Can somebody help me with this issue? Best regards, Jerry ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [October 1, 2023, 7:27pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/2 "2023-10-01T19:27:55Z")
Hi, If you use the filament runout detector, put a small piece of filament inside and bypass it ---
**Author:** ![nazghul](https://avatars.discourse-cdn.com/v4/letter/n/8797f3/32.png) [@nazghul](https://forum.sovol3d.com/u/nazghul)\ **Post date:** [October 1, 2023, 7:58pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/3 "2023-10-01T19:58:03Z")
This thing really does something? I mean, I recently had to remove the top mounted spool holder (no room in a temporary printer enclosure ) and totally forgot that switch that hung on it’s cable somewhere. At least no filament was passed thru. Printing went fine. What leads to the question: Is there something in the config interface to trigger a reaction on the runout switch? ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [October 1, 2023, 8:26pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/4 "2023-10-01T20:26:56Z")
Of course, if the detector detects a filament runout (true or false), it pauses the printer and asks you to reload the filament. ---
**Author:** ![Gokilz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/gokilz/32/1396_2.png) [@Gokilz](https://forum.sovol3d.com/u/Gokilz)\ **Post date:** [October 1, 2023, 8:57pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/5 "2023-10-01T20:57:31Z")
yes, I use the filament runout detector and I just see that the led turned off. the LED turn on again, after I put a stick under the detector. Thanks a lot for your help. Is it the “bug” from any 3D from Sovol, who use runout detector? If yes, then Sovol need to fix this “bug” right? ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [October 1, 2023, 9:28pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/6 "2023-10-01T21:28:41Z")
No, it’s very simple to fix. Open the runout detector and play with the switch until it works properly. Also check the detector connection. ---
**Author:** ![Gokilz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/gokilz/32/1396_2.png) [@Gokilz](https://forum.sovol3d.com/u/Gokilz)\ **Post date:** [October 1, 2023, 9:32pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/7 "2023-10-01T21:32:46Z")
yes, I did it already. I bended the plate little bit more ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [October 2, 2023, 7:28am UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/8 "2023-10-02T07:28:38Z")
You can also send a message to Sovol to request a replacement part during the warranty period. ---
**Author:** ![Gokilz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/gokilz/32/1396_2.png) [@Gokilz](https://forum.sovol3d.com/u/Gokilz)\ **Post date:** [October 2, 2023, 12:14pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/9 "2023-10-02T12:14:50Z")
yes, I’ll try it. btw do you know if it possible to get SV07 Plus Gantry? ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [October 2, 2023, 1:16pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/10 "2023-10-02T13:16:55Z")
What for ? * * * ---
**Author:** ![Gokilz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/gokilz/32/1396_2.png) [@Gokilz](https://forum.sovol3d.com/u/Gokilz)\ **Post date:** [October 2, 2023, 6:49pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/11 "2023-10-02T18:49:18Z")
so that i can get more size to print 😃 ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [October 2, 2023, 7:36pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/12 "2023-10-02T19:36:11Z")
Are you sure it will be enough to just change the gantry? ---
**Author:** ![Gokilz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/gokilz/32/1396_2.png) [@Gokilz](https://forum.sovol3d.com/u/Gokilz)\ **Post date:** [October 4, 2023, 5:30pm UTC](https://forum.sovol3d.com/t/printer-shows-always-paused-print/3595/13 "2023-10-04T17:30:26Z")
No, you also need to change the power supply and the bed