# Printer restarting after heating done

**URL:** <https://forum.sovol3d.com/t/printer-restarting-after-heating-done/4214>\
**Category:** Sovol SV01\
**Created:** [January 2, 2024, 5:06pm UTC](https://forum.sovol3d.com/t/printer-restarting-after-heating-done/4214 "2024-01-02T17:06:06Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![OZNE](https://avatars.discourse-cdn.com/v4/letter/o/54ee81/32.png) [@OZNE](https://forum.sovol3d.com/u/OZNE)\
**Post date:** [January 2, 2024, 5:06pm UTC](https://forum.sovol3d.com/t/printer-restarting-after-heating-done/4214/1 "2024-01-02T17:06:07Z")

</div>

i haven’t used my printer in a long time and after trying to start a print it heats the bed and nozzel, then does an auto home, then it moves the x right for a split second and then the printer crashes and restart, no error no anything, i have no idea what might be causing it.  
i am using cura slicer if that might help, i have also tried some full control gcode and while it maneges to move the x almost to the center the printer restarts anyway.

---

<div class="post-metadata">

**Author:** ![johnny](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/johnny/32/2090_2.png) [@johnny](https://forum.sovol3d.com/u/johnny)\
**Post date:** [December 4, 2024, 8:14am UTC](https://forum.sovol3d.com/t/printer-restarting-after-heating-done/4214/2 "2024-12-04T08:14:17Z")

</div>

You can try adding a G28 command in the slicing software to ensure the printer homes before printing.and review the `klippy.log` file, which might provide specific error information that leads to the printer restarting. If you’re using Cura slicing software, ensure your start G-Code and end G-Code are compatible with Klipper. Some people find it necessary to delete or modify Cura’s default G-Code because it may no longer be suitable for Klipper.