# ⭐ Printer profiles have been added for the SV07 and SV07 Plus to the One-Stop-Shop PrusaSlicer config bundle. ⭐

**URL:** https://forum.sovol3d.com/t/printer-profiles-have-been-added-for-the-sv07-and-sv07-plus-to-the-one-stop-shop-prusaslicer-config-bundle/3996
**Category:** Sovol Klipperized SV07
**Created:** [December 2, 2023, 10:04pm UTC](https://forum.sovol3d.com/t/printer-profiles-have-been-added-for-the-sv07-and-sv07-plus-to-the-one-stop-shop-prusaslicer-config-bundle/3996 "2023-12-02T22:04:37Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![bassamanator](https://avatars.discourse-cdn.com/v4/letter/b/e19b73/32.png) [@bassamanator](https://forum.sovol3d.com/u/bassamanator)
#### Post date: [December 2, 2023, 10:04pm UTC](https://forum.sovol3d.com/t/printer-profiles-have-been-added-for-the-sv07-and-sv07-plus-to-the-one-stop-shop-prusaslicer-config-bundle/3996/1 "2023-12-02T22:04:37Z")

</div>

The bundle contains:

- The Ellis Print Settings, the best print settings in the known universe (yes, even better than those found on Omicron Persei 8)
- 3 different speed profiles (be careful people)
- Pre-defined printer configurations for:
  - SV06
  - SV06 Plus
  - SV07
  - SV07 Plus

- The bundle is ready to go for Klipper users; Marlin users will have to make adjustments to the start and end gcode (just copy and paste from whatever you’re using right now).

My thanks to all my users. 😁 ❤ 🙏🏼

Happy Holidays!🎄🎆

> **[GitHub - bassamanator/Sovol-SV06-firmware: 🔥 A comprehensive Klipper...](https://github.com/bassamanator/Sovol-SV06-firmware)**
>
> 🔥 A comprehensive Klipper configuration for a variety of 3D printers 🔥 - GitHub - bassamanator/Sovol-SV06-firmware: 🔥 A comprehensive Klipper configuration for a variety of 3D printers 🔥