# Printer is hanging in z leveling and does not start

**URL:** <https://forum.sovol3d.com/t/printer-is-hanging-in-z-leveling-and-does-not-start/6067>\
**Category:** Sovol Klipperized SV07\
**Created:** [November 22, 2024, 7:25pm UTC](https://forum.sovol3d.com/t/printer-is-hanging-in-z-leveling-and-does-not-start/6067 "2024-11-22T19:25:26Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![H-k-80](https://avatars.discourse-cdn.com/v4/letter/h/9f8e36/32.png) [@H-k-80](https://forum.sovol3d.com/u/H-k-80)\
**Post date:** [November 22, 2024, 7:25pm UTC](https://forum.sovol3d.com/t/printer-is-hanging-in-z-leveling-and-does-not-start/6067/1 "2024-11-22T19:25:26Z")

</div>

How can i increase this 0.004 value please

Printer always stops because value is not reachable

Thanks for your thoughts

 ![20241122_202502](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/9/9815f1cde939ec464bfd1ef5879d5db5d805a34a.jpeg)