# Printer dragging on nozzle sv06 plus

**URL:** <https://forum.sovol3d.com/t/printer-dragging-on-nozzle-sv06-plus/2320>\
**Category:** Sovol SV06 Plus\
**Created:** [April 17, 2023, 10:52pm UTC](https://forum.sovol3d.com/t/printer-dragging-on-nozzle-sv06-plus/2320 "2023-04-17T22:52:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![wolver4x4](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/wolver4x4/32/1034_2.png) [@wolver4x4](https://forum.sovol3d.com/u/wolver4x4)\
**Post date:** [April 17, 2023, 10:52pm UTC](https://forum.sovol3d.com/t/printer-dragging-on-nozzle-sv06-plus/2320/1 "2023-04-17T22:52:30Z")

</div>

Brand new to 3D printing got the sv06 plus started printing fine lost power in a print and it stopped wasn’t sure what happened so I started over printing something else and now everything is mush nozzle keeps dragging on print  
Please help

---

<div class="post-metadata">

**Author:** ![Dan88](https://avatars.discourse-cdn.com/v4/letter/d/d6d6ee/32.png) [@Dan88](https://forum.sovol3d.com/u/Dan88)\
**Post date:** [April 30, 2023, 10:12pm UTC](https://forum.sovol3d.com/t/printer-dragging-on-nozzle-sv06-plus/2320/2 "2023-04-30T22:12:06Z")

</div>

I have the same problem but it only happens after about the 3rd or 4th layer and i didnt lose power. It printed the Benchy fine but now it drags the nozzle on every print after the 3rd or 4th layer. Still no ideas?

---

<div class="post-metadata">

**Author:** ![wolver4x4](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/wolver4x4/32/1034_2.png) [@wolver4x4](https://forum.sovol3d.com/u/wolver4x4)\
**Post date:** [May 1, 2023, 11:57am UTC](https://forum.sovol3d.com/t/printer-dragging-on-nozzle-sv06-plus/2320/3 "2023-05-01T11:57:31Z")

</div>

I think its the laser but sovol email hasn’t replied in a few days customer service sloooow

---

<div class="post-metadata">

**Author:** ![wolver4x4](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/wolver4x4/32/1034_2.png) [@wolver4x4](https://forum.sovol3d.com/u/wolver4x4)\
**Post date:** [May 23, 2023, 6:37pm UTC](https://forum.sovol3d.com/t/printer-dragging-on-nozzle-sv06-plus/2320/4 "2023-05-23T18:37:47Z")

</div>

sovol customer service sucks i had to buy the head unit with laser my printer is working again