# Printer.cfg for SOVOL SV06+ klipper screen

**URL:** https://forum.sovol3d.com/t/printer-cfg-for-sovol-sv06-klipper-screen/4277
**Category:** Sovol SV06 Plus
**Tags:** firmware
**Created:** [January 11, 2024, 2:08pm UTC](https://forum.sovol3d.com/t/printer-cfg-for-sovol-sv06-klipper-screen/4277 "2024-01-11T14:08:22Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![gregma](https://avatars.discourse-cdn.com/v4/letter/g/f6c823/32.png) [@gregma](https://forum.sovol3d.com/u/gregma)
#### Post date: [January 11, 2024, 2:08pm UTC](https://forum.sovol3d.com/t/printer-cfg-for-sovol-sv06-klipper-screen/4277/1 "2024-01-11T14:08:22Z")

</div>

Can anyone share the printer.cfg from the official Sovol Klipper Screen that is for the SV06+? I can’t find it anywhere in the official SOVOL places.

-gregma

---

<div class="post-metadata">

### Author: ![spannmagoo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/spannmagoo/32/1006_2.png) [@spannmagoo](https://forum.sovol3d.com/u/spannmagoo)
#### Post date: [January 11, 2024, 4:47pm UTC](https://forum.sovol3d.com/t/printer-cfg-for-sovol-sv06-klipper-screen/4277/2 "2024-01-11T16:47:37Z")

</div>

> **[GitHub - Sovol3d/SOVOL\_KLIPAD50\_SYSTEM](https://github.com/Sovol3d/SOVOL_KLIPAD50_SYSTEM)**
>
> Contribute to Sovol3d/SOVOL\_KLIPAD50\_SYSTEM development by creating an account on GitHub.

---

<div class="post-metadata">

### Author: ![gregma](https://avatars.discourse-cdn.com/v4/letter/g/f6c823/32.png) [@gregma](https://forum.sovol3d.com/u/gregma)
#### Post date: [January 11, 2024, 5:25pm UTC](https://forum.sovol3d.com/t/printer-cfg-for-sovol-sv06-klipper-screen/4277/3 "2024-01-11T17:25:05Z")

</div>

Thank you so very much!