# Print not centered on build plate
**URL:** https://forum.sovol3d.com/t/print-not-centered-on-build-plate/6763
**Category:** Sovol Klipperized SV07
**Created:** [January 30, 2025, 7:14pm UTC](https://forum.sovol3d.com/t/print-not-centered-on-build-plate/6763 "2025-01-30T19:14:05Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@coloradodanrubin](https://forum.sovol3d.com/u/coloradodanrubin)
#### Post date: [January 30, 2025, 7:14pm UTC](https://forum.sovol3d.com/t/print-not-centered-on-build-plate/6763/1 "2025-01-30T19:14:05Z")
I have spent seven days trying to get my prints to start in the middle of the build plate; I have watched every YouTube video available with no success; I have adjusted the printer config in the firmware with no success; I have tried with slicer orca and cura with no success; I’ve even tried 3 AI models to adjust the G-Code so that the print is 10 mm to the left X with no success; adding to the fact I used to build these years ago with no issues and I have a degree in engineering, this printer makes me want to give up the hobby; all I want to do is move the print to the left 10 mm, and even though I can build a robot from scratch, I can’t seem to do this one simple thing
---
### Author:  [@mich0111](https://forum.sovol3d.com/u/mich0111)
#### Post date: [January 30, 2025, 7:18pm UTC](https://forum.sovol3d.com/t/print-not-centered-on-build-plate/6763/2 "2025-01-30T19:18:43Z")
Send an email to sovol to have support with your order number and pics.
They will reply within a week… but after their new yeardy holiday, in a few days.