# Print issues **URL:** \ **Category:** Sovol SV06 ACE\ **Created:** [January 30, 2025, 8:00pm UTC](https://forum.sovol3d.com/t/print-issues/6765 "2025-01-30T20:00:12Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Leviolson13](https://avatars.discourse-cdn.com/v4/letter/l/d2c977/32.png) [@Leviolson13](https://forum.sovol3d.com/u/Leviolson13)\ **Post date:** [January 30, 2025, 8:00pm UTC](https://forum.sovol3d.com/t/print-issues/6765/1 "2025-01-30T20:00:12Z")
![IMG_1906](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/f/f93bdb9fa298b55cc64d03fe9a55d74d91e1423f.jpeg) I tried printing a stand for my rc card and it did this. I just got this on Sunday and I am so lost. Any help would be appreciated. And notice the left side looks like it failed printing correctly ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [January 30, 2025, 8:07pm UTC](https://forum.sovol3d.com/t/print-issues/6765/2 "2025-01-30T20:07:13Z")
What is the model supposed to look like…?? So we have something to compare it to. Also, what filament, hotend temp, bed temp, supports…?? ---
**Author:** ![Leviolson13](https://avatars.discourse-cdn.com/v4/letter/l/d2c977/32.png) [@Leviolson13](https://forum.sovol3d.com/u/Leviolson13)\ **Post date:** [January 30, 2025, 9:29pm UTC](https://forum.sovol3d.com/t/print-issues/6765/3 "2025-01-30T21:29:39Z")
I had the bed temp at 67 and the filment temp at 220 and it’s the filment that came with the printer and I’ll get a pic of what it’s supposed to look like when I get home ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [January 31, 2025, 9:11am UTC](https://forum.sovol3d.com/t/print-issues/6765/4 "2025-01-31T09:11:06Z")
Hello, If it’s PLA, the temperature is too much high. Try 60 for the bed and 195 for the filament. ---
**Author:** ![Oliver](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/oliver/32/2593_2.png) [@Oliver](https://forum.sovol3d.com/u/Oliver)\ **Post date:** [January 31, 2025, 12:14pm UTC](https://forum.sovol3d.com/t/print-issues/6765/5 "2025-01-31T12:14:26Z")
Welcome to the forum and have fun with the SV06 ACE! The included PLA is not representative of normal printing. It is a PLA without the addition of pigments or other additives. This means that this PLA has a very low melting temperature and requires very strong part cooling. Usually PLA is more of a mixture of PLA, dye and other additives. The photo does not show how the object is aligned on the print bed. A support structure may be required. The information is a bit too limited to give precise details on the settings. ---
**Author:** ![jhhest](https://avatars.discourse-cdn.com/v4/letter/j/ac91a4/32.png) [@jhhest](https://forum.sovol3d.com/u/jhhest)\ **Post date:** [February 1, 2025, 11:08pm UTC](https://forum.sovol3d.com/t/print-issues/6765/6 "2025-02-01T23:08:08Z")
Maybe not the result you were hoping for, though it seems that at least most of the machine is working. The suggestion of using lower temps is a good one. Also maybe it is better to buy some proper filament. The white filament isn’t neccesary the best filament. Always wise to start with a baseline. Use the benchy that is on the sdcard. That way you know you are printing a model that has certainly has all the right settings. (there should be one on it which you can print under 13 minutes with a good result). A good place to start is ellis3dp. It has a few good tips on bed adhesion and calibration. Lots of problems can be prevented following these steps. Good luck!