# Orca Slicer v2.3.2 is out, some interesting changes

**URL:** <https://forum.sovol3d.com/t/orca-slicer-v2-3-2-is-out-some-interesting-changes/9804>\
**Category:** General Chatting\
**Created:** [March 25, 2026, 7:12pm UTC](https://forum.sovol3d.com/t/orca-slicer-v2-3-2-is-out-some-interesting-changes/9804 "2026-03-25T19:12:20Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![MikeHides](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mikehides/32/4372_2.png) [@MikeHides](https://forum.sovol3d.com/u/MikeHides)\
**Post date:** [March 28, 2026, 6:18pm UTC](https://forum.sovol3d.com/t/orca-slicer-v2-3-2-is-out-some-interesting-changes/9804/11 "2026-03-28T18:18:06Z")

</div>

I’ll second this @mich0111!

For me, Windows install, checked the uninstall older version box, install. When installer finished, OrcaSlicer 2.3.2 started right up with all of my profiles, nothing seems to be missing. 🎉🧐 UI has a few changes!

Now to go find the Sovol Zero nozzle profile thread 🤔 … Found it! [Orca Slicer Profiles](https://forum.sovol3d.com/t/orca-slicer-profiles/7833) thanks for posting @jbob

Ohh and I looked at the “Quality → Set other flow ratios” options, looks promising. Might try see if I can improve that Flexible PLA Ball print I was working on. 🧑‍🔧[Sovol Zero and Flexible PLA print help](https://forum.sovol3d.com/t/sovol-zero-and-flexible-pla-print-help/9105) . Carpe diem, off to print!

Cheers,  
-Mike

---

_[View the full topic](https://forum.sovol3d.com/t/orca-slicer-v2-3-2-is-out-some-interesting-changes/9804)._
