# Orca Slicer uses codes that Sovol SV06 ACE doesn't recognize

**URL:** <https://forum.sovol3d.com/t/orca-slicer-uses-codes-that-sovol-sv06-ace-doesnt-recognize/6078>\
**Category:** Slicer Questions\
**Created:** [November 25, 2024, 11:36am UTC](https://forum.sovol3d.com/t/orca-slicer-uses-codes-that-sovol-sv06-ace-doesnt-recognize/6078 "2024-11-25T11:36:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![luwi66](https://avatars.discourse-cdn.com/v4/letter/l/3be4f8/32.png) [@luwi66](https://forum.sovol3d.com/u/luwi66)\
**Post date:** [November 25, 2024, 11:36am UTC](https://forum.sovol3d.com/t/orca-slicer-uses-codes-that-sovol-sv06-ace-doesnt-recognize/6078/1 "2024-11-25T11:36:45Z")

</div>

Hi, I’m running an SV06 ACE and use OrcaSlicer - fresh installed with standard parameters.  
My GUI prints the model well with no problems. But the dashboard often reports  
Unknown command “G3” and Unknown command “G17”.  
I know that G17 defines a “CNC workspace” and G3 allows arcs as path for moves.  
Obviously OrgaSlicer uses these, bot Sovol ACE not.

---

<div class="post-metadata">

**Author:** ![Smithjw13007](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/smithjw13007/32/2422_2.png) [@Smithjw13007](https://forum.sovol3d.com/u/Smithjw13007)\
**Post date:** [November 26, 2024, 10:11pm UTC](https://forum.sovol3d.com/t/orca-slicer-uses-codes-that-sovol-sv06-ace-doesnt-recognize/6078/2 "2024-11-26T22:11:41Z")

</div>

Yes, Same thing on mine.

 ![image](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/0/090962e58199045c780fc6fb436e7586d34acc3b.jpeg)